Recent content by Sitz

Just pulled the cover, and fired up the filter. Water temp 48 degrees🥶. My robot died last fall 😡so time to vacuum manually 😡😡

What did you use to support the fence on the concrete sides of the pool? I'm going to have to do the same this fall as my labs run across and lie on my mesh safety cover and have worn holes where it touches the edges of the concrete coping. It has lasted only 4 seasons!

Welcome! I too am from Ontario and yes the Taylor test kits are hard to come by! What I have found is I order from the US Amazon site and deliver to my mailbox in Detroit OR for some refills of reagents I email the distributor directly and e transfer funds. I can send you the email if you would...

It’s a Hayward 250,000 btu

Thanks for the quick responses. To clarify I do indeed have a heater. It was in my signature before but I will re add it. Still no need to worry about csi ?

Hello everyone, Just a quick question about csi. My current levels are FC 6.5 CC 0 PH 7.4 TA 70 CA 90 CYA 70 CSI via pool math -0.93 My pool is vinyl with SWG so my understanding is that calcium isn’t needed. Should I raise my ph to 7.6 or 7.8 or raise the calcium to a level closer to 200 in...

Thanks guys, Now that I have learned some things 😳 I agree that the t9 is probably a little small for my pool. The pool was installed in June and the t9 is rated for a 25,000 gal pool so that was the one the pool contractor said I needed(what did I know lol) I know now that the swg wasn’t...

Water clear. ✅ CC =0. ✅ OCLT= .5 ppm ✅ yay seems like I can end my first slam!! I’m going to keep at slam level for at least 1 more day just to be sure! Should I wait until FC levels are at maintenance level before bringing up my CYA to ideal range ( 70-80 ppm )currently 40 for Slam. Thanks...

Ahh. All fixed. Thanks!

Hi Leebo, I have pull down refreshed and signed out and back in to no avail

Help! My Pool Math overview doesn’t update with new logs. After inputting my first logs the overview showed correct. Since then I have done more tests and logged them but the overview still only shows the original tests saying that they are due in 15 days. iOS version

Thanks Newdude, I have all the necessary info cya , [email protected] Etc. Was wondering what to do with the SWG during slam. Leave on or turn it off for duration of slam?

Hi Everyone new pool owner here! After have my slightly cloudy water I did an OCLT and I failed so starting my first slam today! My question is I turned off my SWG for the OCLT but not sure what to do during the SLAM process thanks