SecoSteve's latest activity
-
SI can put the old one that I have and use that as my dummy
-
SSecoSteve replied to the thread LED Remote Control.Are you sure this is an LED light? I would think LED lights would need to be fully replaced and not just bulbs. Anyhow, when I turn my...
-
SSecoSteve replied to the thread The Ghost in the Machine is Back.......Can we rule out the "ghost" being an actual person messing with your system? A kid or disgruntled neighbor?
-
SSecoSteve reacted to wireform's post in the thread The Ghost in the Machine is Back...... with
Like.
Here on TFP the calendar date for pool opening is not a date you pick in your mind but rather the water temperature getting close to the... -
SSecoSteve replied to the thread Jandy Salt Cell 1400 Code 121.I take mine in for the winter, but I have the Fusion Soft 1400 that is a vessel that holds the cell. I put in a "dummy" cell that is...
-
SSecoSteve replied to the thread The Ghost in the Machine is Back.......Nice. You are at "Hotel Haze" phase of your SLAM. I am a little concerned now about my water. I peeked under the cover a couple weeks...
-
SSecoSteve replied to the thread The Ghost in the Machine is Back.......Sounds like your season is off to a rocky start. Sorry about that. First your cell error, swamp, and now this. Hope it clears up! How...
-
SSecoSteve replied to the thread Jandy Salt Cell 1400 Code 121.Great observation. Also, the wire connection point as it stands now could allow water to get into the prongs and shorten the life.
-
SSecoSteve replied to the thread First time opening my pool.You want to make sure ALL plugged pipes are unplugged. Also, if you have Jandy Never Lube Valves, you may have to reinsert the handles...
-
SSecoSteve replied to the thread water spray.If you want the spray to go farther, then you should close, or partially close the black ball valve below the sprayer, which is...
-
SSecoSteve replied to the thread Clog somewhere in pipes that I cannot loose.What happens when you tried 1,2,3,4 above? Did you feel any water coming out the other end or feel any suction from the shop vac? If...
-
SSecoSteve replied to the thread Warming pool with hot water heater.A solar cover will heat your pool to about 90 degrees in the heat of the summer. It's a pain taking it off and on and where to put it...
-
SSecoSteve replied to the thread Thinking of replacing my TF-100 with a TF-Pro, will the Taylor speed stir fit In the pro case? Did you switch and was it worth it?.Since you're buying the new carrier, you might want to get the smaller CYA viewing tube that will fit in the Pro case.
-
SSecoSteve replied to the thread LED Bubbler alternative - Vinyl Liner sun shelf.Can't help with the bubblers, but I would think twice about putting any furniture on the sunshelf with the vinyl liner. You will most...
-
SSecoSteve replied to the thread Ahhh... the infamous Air Leakage mystery (pic included).Did you try running hose water over the valve set in the position that creates bubbles with the pump running? If the bubbles stop, you...