Recent content by scott407

So if I'm tracking.... I need reduce the runtime for my pump to get in the 3-5 ppm. Does that translate to a 50% reduction in time = 50% reduction in FC (I understand bathing load and sunlight use chlorine at varying rates)

Here is a screenshot from the calculator. When I initially added the salt there was a check system warning because the levels exceeded 4000 ppm. Once the salt was distributed it went back to normal. ========================================== Scott Pool ------------------------------------------...

Thanks for the replies. I always am able to count on this group for guidance. The salt was at 460 to 520 (according to the strip test) I did not have the k1766 at that time. I'm trying to avoid the problem of having to dump and replace water. I learned early on that "adding all of the...

I have a brand new SWG install. The K1766 test kit shows 2600, the Aquarite strips that Hayward sent with the salt system show 2580 and the salt system says 3000. I know there is a margin for error in all of them. I am struggling with adding more salt to get closer to 3200. My FC is at 6.5...

I have an s200. It is nice. The bottom of the basket opens so there is no digging out worms or debris if you have a water hose close. You could use a hair try or similar device if needed. It also comes with a normal filter that is good for daily use to catch leaves and most pin head size debris...

Thanks for your help

Thanks! I use the poolmath app and just realized that I needed to change my settings from Bleach to SWG to get the right levels Does it matter if the pump run time is split or during sunlight vs night? Should I just pick 14 hours of the day to run continuously?

I installed an Aqua Plus T-15 SWG yesterday. My salt level seems to have leveled off at 3000 ppm and other than getting my CYA level up from 30, my water is in range. Is there a preferred method to determine the % setting for the SWG? Should I determine the "turn over" time for my pool based...

So last year when my pool was installed we assumed that all the cool stuff was taken care of when we ordered the package. A key feature (besides a variable speed pump) was left out. We did not get a pump timer. I am looking to get a pump timer (Intermatic Etc..) Any suggestions? Pros - Cons...

5 days later. Wow! I'm so glad to have converted.

Final reading for this post. FC - 8.0 CC - 0 to .5 (it never gets even close to the pink it did when it was 2+) PH - 7.5 TA - 100 CH - 50 CYA - 30 If you're converting, my best advice is follow the guide. DO NOT add CYA before you're finished with the conversion! Glad to be through this...

I use an s200 and it does very well with fine debris when using the fine pleated filters. I was using the medium filters when my concrete pool deck had the expansion joints cut in. The concrete dust went straight to the bottom. When I swapped to the fine filters it only took a couple of runs to...

Thanks to everyone who helped.

It's clear.