Recent content by rockylreed

I just installed a new AquaRite Goldline with a T Cell 15 SWG. I’ve noticed that the panel will say that it is generating, but when I check the instant salt reading, it will say -0 as if it’s not generating. There are no error lights on the panel either. Is this normal? Does the cell turn it...

I just installed a new AquaRite Goldline with a T Cell 15 SWG. I’ve noticed that the panel will say that it is generating, but when I check the instant salt reading, it will say -0 as if it’s not generating. There are no error lights on the panel either. Is this normal? Does the cell turn it...

I recently converted my 19,000 gallon in ground gunite pool to salt water. I do not have scaling at or below the waterline; however, after a pool party with a lot of splashing, there is a white haze on the tile and bricks above and around the edge of the pool. I can wipe it up with some heavy...

I’m going to drain 50% of my water after July 4th to start over so that I can get CYA back to where it should be at 80ppm. I’m using pool math’s suggestions to manage and add chemicals. After diluting the acid in a 5 gallon bucket, can I use a pool brush to clean up the tile? The tile just...

I have a TF-100 kit and have also verified my results with the local pool store. The only result on my last pool store double check that doesn’t match my number is alkalinity. They measured 60 and I’m measuring 110. Even with this difference, I don’t understand why I would see scaling above...

I recently installed a Hayward T-15 SWG and have 3900 ppm salt. Pool is gunite and over 10 years old. I increased calcium hardness from 225 to 350ppm. CYA is very high due to previous home owner at 150, so I am keeping my chlorine at 7 to 9 ppm. Ph is kept between 7.2 and 7.5 with an...