I just installed a new AquaRite Goldline with a T Cell 15 SWG. I’ve noticed that the panel will say that it is generating, but when I check the instant salt reading, it will say -0 as if it’s not generating. There are no error lights on the panel either. Is this normal? Does the cell turn it self on and off to hit a certain percentage? I have the cell turned to 50%. I can also flip the cell from on to off and it will then give me instant readings again.
Hayward Aquarite Questions
- Thread starter rockylreed
- Start date
Can you fill out all your diagnostic readings?
Is it possible the wrong size cell is programmed in?
Is it possible the wrong size cell is programmed in?
It's a 3 hour cycle. The percentage determines the amount of time it runs. At 50%, it runs for 90 minutes and then off for 90 minutes. Then, it reverses polarity and begins a new cycle. The Generating light will be on when the switch is in the Auto position even when the cell is not generating.