Recent content by robdac

Fascinating read. When I discovered TFP, got my TF-100, and tested my pool the FC was at 55. That's measured with the TF-100. The other chlorine test was dark brown! Very similar situation. Pool guy was completely dismissive. They were paying for the chemicals. I guess it was cheaper to...

Yes, it's better. We take 2+ week trips in the summer. I lower the Ph before I leave. When I get back it's a little elevated. That's it. Done.

Re: Replaced T15 Hayward SWG, salt display still showing low &Check System after 3 da The unit has an instant salt reading when you run through the diagnostics by pressing the small button. Once you're on the salt reading move the power switch to "super chlorinate" and then back to the on...

1. As long as the salt cell will operate with that level of salt you will be fine. 2. Don't trust the pool store. Buy the kit and test it yourself. Monthly should be fine. 3. Salt doesn't "burn off." It will stay in the water indefinitely. The salt in the water can only be diluted...

It's not the SWCG's fault. Something is eating all the chlorine it can produce. It's either Algae or Sun. What is the CYA level? Go to the top of this page and click on pool school. Read about the ABC's of pool care and how to SLAM the pool. Users here don't "shock" our pools, we SLAM them...

Get some bleach and a broom or mop and scrub down the cover.

It sounds like the SWG but I would plug something else into the GFCI outlet the next time it happens just to make sure it hasn't popped. But, if the outlet is popping repeatedly that is also a sign of a problem as well.

The first time I added borates I went the 20 Mule team borax and muratic acid route. This year I used boric acid from Duda Diesel. It was way easier and about the same price as doing it the hard way.

Just because there is not chlorine in the pool doesn't mean there is something wrong with the cell. Most likely the cell is working properly. You just happened to be looking at it when it was not supposed to be producing chlorine because it was set to something less than 100% or super...

Sounds like it's running fine and then shuts off. 1. What is the output % set to? The unit only runs full on. The % just controls how long it's fully on during a given 180 minute cycle. After a period of time mine doesn't produce chlorine either. That's normal. 2. What happens when you...

If you are going to pay someone to install the pump make sure that if you don't already have proper hi-temp unions on the pump they put them on as part of the installation. That way, if you ever need to remove or replace the pump it will be much easier to do it yourself.

Great. I've been there!

Not quite. The center aluminum colored arm does not move. Leave it alone and just consider it a pointer as to the time of day. Pull out the yellow dial and rotate the yellow dial so that the current time of day is under the aluminum colored pointer. The timer works exactly opposite of a...

I didn't know it was possible to arrange words in sentences like that! Astonishing! Don't ever lose his contact info.

My pool is about 1/3 the size of yours and I've used about 3 quarts in 2 months. So, maybe around a gallon a month?