Recent content by Rensfirstpool

Changed profile info. My pool isn’t covered , and I get sun all day . So running my chlorinator at 50% may give me an average 3ppm ; do I need to keep it at 50 for majority of time or lower the setting once desired chlorine levels are acceptable? Thanks in advance

Hi ajw22... it's 19924.648705 gallons. did i make an error somewhere in my profile? I am new here

Oops...here are my test results from earlier on. (around 5pm) ========================================== Rens Pool ------------------------------------------ Build Type: Vinyl Volume: 75423 liters Chemistry: SWG...

Thankyou! I turned on the chlorinator to 20% and i'll check the levels again tomorrow. I assume I should see FC levels around the same by tomorrow this time? Should i adjsut ph as it is a little high??

tested today and salt is at 3200ppm. 3400 is acceptable high for the tcell 925 extended life according to my understanding. Shall I keep swg running at 20% I have a vsp running 24 hours/day. ? Thanks

The water is clear! I tested free chlorine last night it was high ( an hour after I dumped 10L and 2 20kg bags of salt. Chlorinator was off all night. thanks @JJ_Tex . I tested before the sun went up (level was at 7 ppm) and again mid afternoon (still at 7ppm) and again about an hour ago...

========================================== Rens Pool ------------------------------------------ Build Type: Vinyl Volume: 75423 liters Chemistry: SWG ------------------------------------------ Latest Test Result...

Here are this evenings results. Am I ok to turn on SWG? Or wait ? ========================================== Rens Pool ------------------------------------------ Build Type: Vinyl Volume: 75423 liters Chemistry: SWG...

Ok I’m adding chlorine recommended amount from pool math 10litres and salt in two 20kg bags I’ll keep you posted

Do i add chlorine today and salt tomorrow?

Hi @Texas Splash I have the test rom the taylor ck-2006. And the salt test from k1766. Here are my numbers.. ------------------------------------------ Build Type: Vinyl Volume: 75423 liters Chemistry: SWG...

Thanks for the quick reply I used algeacide last month but about 200 ml of it . How much water do you recommend I drain in the meantime. Just ordered the tests so I should have more results when those tests arrive .

My pool shop told me I have 0.25 ppm of coppers. What i don’t understand is how much metasol to add? Do I adjust other levels first ?? Thanks I’ve attached the readings