Recent content by Randy956

Quick update: Thank your for your advice. The 3M 5200 did the trick. I cleaned as much of the old gasket out of the crack, filled it with 5200 and smoothed it with my finger. After waiting a little more than 2 days I filled the pool past the light and it's holding. Thank you again! Randy

Mostly the water I dive is cold and as I've aged I'm liking the cold less and less. My latest suit is a DUI TLS350 and I like it quite a bit. As long as I keep it maintained it's a pretty good suit. I use it pretty hard as a divemaster, but no suit is perfect. One day when I move someplace...

I was afraid of that. I do a fair bit of scuba drysuit repair and run into the same issue with silicone.

I ordered some of the 3M sealer and will give that a try. Thanks!!

Here is a picture

I hope the picture shows up. I need to close the pool SOON so I have some tubes of silicone to try. If if works

Hello, I have a 35 thousand gallon 25 year old gunite pool with two lights. Both light housing (cans) are cemented in behind the gunite. Between the stainless light housing and the gunite is a rubber gasket that has rotted away and I've got a pretty bad leak through the deteriorated rubber...