Recent content by rams_man13

I think I solved this. After reading the manual. I have this little dohickey thing here. My circuit board requires program A to be running. For some reason the last few days it was switched to program B. When I switched it back to Program A, flow was detected. So, that definitely helps...

Ok, I think I see where the flow sensor connects. Is this correct? Unplug and replug in a few times? I think it's this product: Jandy AquaPure | Fusion Soft Slotted Flow Sensor, 3-Port Cell (16') - R0452501

Hello Most Helpful Pool Friends, I have an AquaPure Nature2 SWG and a iAquaLink system. My filter pump is on a schedule through the iAquaLink. It comes on at a regular time and shuts off at a regular time. When it comes on one of 3 things happens: 1) It detects flow and everything is...

Thanks for your help @HermanTX and all! Yesterday everything operated smoothly. Everything turned on and off as expected and there was no error through the cycle. I will continue to monitor moving forward, so happy I found this community!

Took some photos, hopefully this helps. No "No Flow" error today with either the low speed or high speed pump settings. ' From yesterday when I posted: Jets seem to be working fine in high speed and low speed. Skimmer basket cleaned. PSI of about 16. AquaPure is set to 30%. Salt is 3300 PPM...

On this issue, I believe the pump was on low speed mode at the time of error.

Interesting. Didn't think of that. The error came on last night when it was on low speed mode. I just ran a quick test, the high speed pump running and Status did not return that error. It also did not return the error when the pump was off. So is that an indicator that: 1) The No Flow is not...

TBC to be honest. I haven't been in the house long, but I am having a No Flow error on my Nature2 Fusion SWG, so I also need to fix that issue. If not, I will extend the time on the pump for sure. Pool is not very big, so I assume it will be ok.

Yes, they come on instantly when I flip them on in the app.

This would be under VSP set up under System Setup? When I click it, Application says not installed all the way down the list. Previous owner used Filter Pump alone for High Speed and Filter Pump +Low Speed for Low Speed. I believe it is a 2 speed pump, not a VSP. This schedule does seem to be...

Hi Friends, Just bought a house with a pool a week ago, over my head in the set up. It's a Nature2 Fusion Soft and in the iAqualink app it is giving me Check AquaPure (No Flow). I assume this means my pool isn't producing chlorine. Jets seem to be working fine in high speed and low speed...

Hi Friends, Just bought a house with a pool a week ago, over my head in the set up. Got the account opened with the iAqualink. Cleared the old schedule, created my own. After some fiddling (realizing the filter pump had to be scheduled to be on even in low speed mode, not to start and stop...