Recent content by pjdnkral

I have a Hayward Aqua Rite SWG and looking to purchase a salt cell. I'm looking for feedback or reviews for the Chlorinator Pro CP-15 Cell. I would be thankful for any recommendations about this product before going back with a Hayward.

Okay. I understand. But then I don't usually have to replace my cell due to lack of chlorine. I reset ISR to my current tested salt reading. Lets see if it will maintain my 3300 or for how long. I need to to know if switching to the T-5 cell raises the calculated ISR due to bypassing circuit...

I noticed I sent wrong photo...

Okay I removed the jumper...

The R1.40 doesn't give me that option.

Mark, first of all I just want to say that I really do appreciate your technical support with this SWG and I do apologize if I sound a bit forward but I have been around the block several times with the Hayward Acurite SWG and I'm tired of replacing cells. Yes, I know its the cell. I'm done with...

First number is voltage / second is amps The cell works just like it should to maintain proper chlorine level. I read on here where others have the same issue after replacing with new cell. I cant read or see a cell serial number. I want to bypass the calculated reading and set it to fixed value...

Report all diagnostic readings when you.. Move the switch from auto to off and check all of the readings. 31.4 / 0 Move the switch back to auto and recheck the readings. 26.7 / 1.85 Move the switch to off for a minute and then back to auto and recheck the readings. 26.5 / 2.63 What are the...

Sir...Like I said, T-15 (R1.40) cell works fine and continues to generate the proper levels of chlorine. Why on earth would I replace it. Are you insinuating there is a sensor in the salt cell that calculates ASR and this is the reason why the reading drops below 1900/below, when actual is 3200.

I have been testing with digital tester and Leslie Pools for several years. Readings are very close to each time. Actual reading is just around 3200.