Recent content by phildg

To try and get some quick, accurate and easy readings, I picked up one of these on Amazon for $12. Quick, easy and looks accurate so far: VIVOSUN PH Meter Digital PH Tester Pen for Water

I added some MA and it cleared up. Thanks again.

Thanks

I put in the info and the result was a potential for scaling. It looks like the ph may be high since when I lower the ph the CSI was fine. Unless you have another thought, I will put in dome Muriatic acid tomorrow and see what happens. It is a new (water in 6/4/2020) pool and as I understand...

When I used my dolphin last, there was some white substance that was picked up. Never happened before and not visible to the eye. I thought it was the stabilizer that caused this. I will check on the CSI

Here is a recent set of test results using my Pentair Intechlor 40 run at 60%: Total Chlorine: 5.0 ppm Free Chlorine: 5.0 ppm Combined Chlorine: 0 ph: 8.0 ( muriatic acid added to reduce) Acid: 2 Total Alkalinity: 120 ppm Calcium Hardness: 375 ppm Stabilizer 50 ppm (stabilizer added to increase...

Moved from here. I have a similar issue with small surface particles. I run a Pentair 200 for 11 hours around 50. I skim before going in to the pool. I am talking about some pretty small sediment being picked up in a fine skimmer. The pool cartridge is cleaned every week. I use a Dolphin T35 3...

Not sure what it is attached to but it is working now as a "Gas" Heater. Thanks!

I had an issue with my AqualCal Heat Pump starting up with the IntelliCenter. The "fix" was quite easy but not intuitive. The AquaCal is set up with a two pin communication wire which is recognized by the IntelliCenter when you make the interface with a GAS heater NOT a Heat Pump. This sets the...

Amazing work! Will this work with Android or is there a similar Android project? Thanks!

Nice talking with you R. You gave me a great "jump start" on how to use the web client. Thanks for your support!! Best! Phil

Let;s try to talk Friday. Thanks so much for your assistance! Best, Phil

Went to log in and got this: https://intellicenter.com/#/installations Nothing comes up and can not log in

PS...Have a great night! :)

I am just not getting this! ARRR Can you talk me thru this? Let me know and I will send you contact info for tomorrow or another day that works for you. Thanks! Phil