Recent content by paokaras31

here is a closer look to my setup

Hi It is on the main discharge pipe . I think the velocity is roughly the same before and after the filter and I cannot put it between the pump and the filter due to spacing issues (my engine room is below ground and piping is angled) . Her is the installation instructions:

1)get a cheap submersible dirty water pump from ebay with a top outlet 2) attach plastic pipes to the outlet so that it is higher than your pool depth 3) pierce the top cap and create a fountain 4) connect to power and throw in the pool all night it is that black little thing in the middle...

Hello guys. Just giving a little heads up to everybody who use an automated pH calibration system. Mine is an astral pool Ph Basic 5l/h. It has a pH sensor after the main pump and filter and a muriatic acid 32% inlet before the swg cell .(swg cell is the last in line on my main feed line to the...

And here are some images of my entire pool :cool: which thanks to this site is awesome for the third summer in a row!!!!! - - - Updated - - - - - - Updated - - -

Ok . Now I have CC 0 after just boosting the SGW for a couple of days. My readings are FC 9 CC 0 TA 110 ph 7.4 (try to lower alkalinity) CH 340 CYA 70 29 Celcius I did another test from the overflow reservoir water at the same time and interestingly the results were FC 6 CC 0,5 all the rest...