Recent content by NewPoolGuy2023

I reached out to PAL and they suggested changing the circuit board (Part: 42-PCR-4-BRD-CL) and if that doesn't work, then I'll have to change the system because they do not make 12V systems anymore.

See the picture of the board.

Yes, I have a PCR-4. See the pictures attached.

So I solved the GFCI issue and that is working properly now. I tested the load on the wires that run from the Pentair Automation Box to the PAL PC-4, and they have power running through them. However, the PAL Box does not power on despite getting power from the Automation Box. Are there any...

Are you talking about the breaker being off when you say "Is the power to the lights turned off?" The breaker seems to be fine. See pic

Hello everyone, I recently noticed that my pool lights are not turning on. I have a Pentair Automation system and PAL Evenglow lights linked via a PAL PCR-4 box. I opened the PCR-4 box and realized no power was getting to it (the wifi lights were turned off so I assumed no power was flowing to...

I took it to the local pool store to be tested and they said my pool water had 60ppm of stabilizer and the water from the hole had no trace of stabilizer. Am I to conclude that the water is not from the pool and could be either ground water (potentially high water table) or maybe a plumbing leak...

Hi Everyone, I am new to this forum, and also a new pool owner (bought last summer). I wanted to get your assistance/thoughts on a potential issue with water near my pool. Background information: A few months ago when we started to get a lot of rain in Houston, I noticed part of my yard was...