NewHouseFirstPool's latest activity
-
NNewHouseFirstPool reacted to PoolStored's post in the thread First time opening - does this plan look good? with
Like.
Warm the sample to room temp before testing CYA. -
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.FC holding at 10.5 since topping off the chlorine 4 hours ago. I still can't get any detectable CYA reading! So I went aggressive with...
-
NNewHouseFirstPool reacted to PoolStored's post in the thread First time opening - does this plan look good? with Like.
And you can see the bottom of the deep end...
-
NNewHouseFirstPool reacted to Newdude's post in the thread First time opening - does this plan look good? with Like.
I lost count how many times i SLAMed for big parties and many have commented how nice it was with 'no chlorine'. With alage...
-
NNewHouseFirstPool reacted to sande005's post in the thread First time opening - does this plan look good? with Like.
The pool is safe and swimmable as long as the CL is at or below SLAM level. The SLAM levels seem extremely high, but one has to...
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.I'll keep it up today and see if I see improvement in the appearance of the "dirt" and the OCLT. But at what point is my pool swimmable...
-
NNewHouseFirstPool reacted to sande005's post in the thread First time opening - does this plan look good? with Like.
Dead algae looks like dirt. Live can be sticky to brush. Dead "poofs" up in clouds very easily. Usually first seen along seams in the...
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.FC: 8 this morning, so I added a bit more. I've been brushing manually and running the robot once/twice a day. The water looks crystal...
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.Just went to test. Yikes, that's cold! If I stick my palm in front of the port I don't feel any suction at all. Again feeling around...
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.No other pipes. I don't have a wider picture at the moment, but the only thing out of picture is the non-functioning heater to the left...
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.Here's what one of those mystery ports looks like (the bottom right one). The other picture shows my piping setup in case that helps. My...
-
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.There are two floor drains in the deep end. Along the side of the pool there are two "ports" that don't have threads, so they don't seem...
-
NNewHouseFirstPool replied to the thread First time opening - does this plan look good?.Uh oh. Did I miss a step? When I reached deep into my skimmer today I noticed there was only one drain hole open. Next to it there's a...
