Recent content by mollymom

Hi Texas. I did text them yesterday, and they said they will send out a plumber. I almost called for a leak detection company, but I guess I will give them a chance. I turned the faucet down to the halfway mark but the leveler was still topping the pool off so I shut the valve off all the...

We're 23 days after fill up. The leveler has not been performing well, and we had a plumber out the week that seemed to calm things down. At first the leveler wasn't filling, and when our start up tech turned up the water pressure on the leveler faucet knob there was some leaking into the...

Thanks for this. I knew it was a minimum of a few days; I'll try to see if we can get the speed lowered.

Hi all, Thanks for the advice. I flipped the lid up and I saw that there are 4 speeds, but the LED display was not on. The issue is that I think it's wired in the interrim to override any settings at this point because we couldn't get it to stay on continuously through the app, there was...

Hi Jim, I was able to get this number off the side -(awkard to get to it, the label is hiding behind a pipe) m48ab29Z04 and a super pump comes up in a search. There was some complicated issue (to me) about how it was manually set up (something to do with the spa and switching controls from the...

We finally got our Stonescapes Mini Pebble and filled our pool after six months. We were told by the builder to run our pump continuously for 14 days, but up to 28 days ideally. I'm thinking this is excessive and cannot find this recommendation on the web from NPT. We're on day three and I'm...

No it wasn’t present. There are other areas that look like brushed concrete still so it’s due to frost or whatever.

I'm new to the thread. It's our first time building a pool and we're in the middle of winter. They poured concrete for the coping yesterday and temps dropped into the 30's and this picture looks like its scaling but I'm not too familiar with concrete curing and problems. I'm not sure if there...