Recent content by mollyfranc

  1. M

    How soon to use a robot cleaner

    How soon after a River Rok plaster finish can a robot pool cleaner be used? would fresh plaster dust damage the robot?
  2. M

    Why is Cyanuric acid high in a newly filled pool? What can we do to lower it?

    Yes I'm using test strips (Insta test 6 plus)
  3. M

    Why is Cyanuric acid high in a newly filled pool? What can we do to lower it?

    Hi, Our pool was finished with River Rok plaster and we are filling the pool with hose water. I tested the water coming out of the hose and the Cyanuric acid reading is zero. I did this twice to be sure. When I test the water in the pool the reading of Cyanuric acid is 250! (also checked several...
  4. M

    Concrete pool construction help

    Thank you!
  5. M

    Concrete pool construction help

    Hi there, if anyone has any advice about the pool floor whistling with small air pockets and what to do if it needs to be corrected, please let us know! the video in the link above shows it. As the pool floor was uneven, a concrete mix of about 1.75" thick with thin wire mesh was poured on top...
  6. M

    Concrete pool construction help

    here is the link to the video showing the air bubbles in the pool floor after rain:
  7. M

    Concrete pool construction help

    thank you :-) attached are some photos (the floor "levelling" really didn't level it too good either) we took a short video of the bubbles but unable to upload it here. The mix they used for this 1.75" floor layer was some small gravel, white sand and cement on the wire mesh.
  8. IMG_6398.jpeg

    IMG_6398.jpeg

  9. IMG_6397.jpeg

    IMG_6397.jpeg

  10. IMG_6396.jpeg

    IMG_6396.jpeg

  11. IMG_6395.jpeg

    IMG_6395.jpeg

  12. IMG_6394.jpeg

    IMG_6394.jpeg

  13. M

    Concrete pool construction help

    We would like some pool construction advice. We have an in-ground rectangle poured concrete pool. The concrete shell was poured last year. As the floor was very uneven, the contractor made a concrete mix to level the floor which he made 1.75" thick on top of the base slab and he laid down thin...