Recent content by Modawg2k

  1. Modawg2k

    How to remove slide valve

    I have a Pentair Triton II with a side mount slide valve. This thing is overdue for a cleaning since it gets stuck all the time. I unscrewed the nut but cannot pull out the shaft. I've released the pressure in the system but still stuck. Any tips?
  2. Modawg2k

    Increasing water temp strategy

    Ok thanks. I guess I'll wait for it to raise the regular way.
  3. Modawg2k

    Increasing water temp strategy

    I would like to raise the water temperature of our pool a lot earlier this summer than what it normally does without any external effort. Tell me if I'm crazy: I plan to run the water through our rock water feature every day when we are in low speed so that more water is exposed to our air...
  4. Modawg2k

    Can I do this for a backwash

    I'll look into the idea of a vac hose instead. I did have concerns already over the bw hose kinking up and tearing over time. I really need ~80ft to reach the furthest areas of the grass so I could connect a few smaller ones. Could you point in the right direction of the product I would need...
  5. Modawg2k

    Can I do this for a backwash

    Thanks. I've thought long and hard if flooding my grass with the salt water pool would be ok. My grass is watered to about 7-9" every 2 to 3 days, so like you mentioned, I feel that it would be ok since it will be diluted pretty quickly. - - - Updated - - - Yup, that looks perfect, i'll...
  6. Modawg2k

    Can I do this for a backwash

    Thanks. A backwash hose it is. I already have a 50 foot backwash hose but need another 50 to reach all parts of the grass. Do you think I’m able to link another 50 foot hose together or do I need to get a complete 100 foot hose? I’m trying to think of what fitting would be needed to link them.
  7. Modawg2k

    Can I do this for a backwash

    I would like to water my grass when I backwash, as opposed to what I've been doing for years (the street). I have a 1-1/2" pipe coming out of my filter. Would I be able to get that pvc to attach to a garden hose and water the grass that way? Or is backwashing through a garden hose not the...
  8. Modawg2k

    Connecting backwash hose to pump

    Do I need any special adapter at the end of my 1.5" pipe coming from the pool filter to attach to a standard backwash hose with a clamp? Or is the clamp enough to keep the hose attached?
  9. Modawg2k

    Rubber Stopper for Weir Door Help!

    I tried in a previous post to get any insight but no luck. Here's a picture of the setup. I had to get a new rubber stopper for my weir door. I cannot for the life of me get the thing to fit into the little hole. Anyone with experience have any tips? I've tried pool lube but that did not work.
  10. Modawg2k

    Fla Weir Rubber Stopper Install

    anyone have an idea? I'm sure many have had to install this rubber stopper in their skimmer, it's a Pentair skimmer if that matters
  11. Modawg2k

    Fla Weir Rubber Stopper Install

    I had to get a new rubber stopper for my weir door. I installed one a few years ago but cannot remember how I got this thing to fit. I've tried greasing it up with pool lube and pushing it into the hole but no luck. Any advice...
  12. Modawg2k

    backwash setup

    Do I need to add a 90 degree elbow to my backwash pipe before attaching my hose to the cut backwash pipe? Or can a hose run directly off that cut pipe and make it's own 90 degree turn without getting kinked up?
  13. Modawg2k

    Thoughts on long run times

    I appreciate the discussion. Yeah this guy was referring to keeping the water crystal clear all the time, not so much in regards to chemical levels, even though they are related. I was only using him for a pipe repair, I manage my own pool and I'm perfectly fine with how it looks.... but I...
  14. Modawg2k

    Thoughts on long run times

    I know TFP's take on how long to run the pool..... basically you can run it for short amount of time as long as things are keeping clean. I had a pool guy over last week to repair something and he was saying to run the VS pump at low speed for practically 24/7 (minus peak electrical hours), and...