Recent content by mike5906

  1. mike5906

    Omnilogic

    I get the exact same error and I can assure you my computer and MSP are both connected to the Internet.
  2. mike5906

    Sense and Dispense ORP Issue

    I just got my new sensor and that fixed the problem! It's reading exactly 650mV now. Before it was replaced the old one was reading 125mV. Woohoo!
  3. mike5906

    Acid Feeder Mix Ratio

    I recently installed an acid feeder from Hayward (peristaltic pump). It is automated via the Sense and Dispense module. The tank instructions recommended a 4:1 acid water mix in the tank. However, my pool DRINKS acid. Which is why I decided to get a pool. The water here is alkaline and with...
  4. mike5906

    Sense and Dispense ORP Issue

    I just got off the phone with a different hayward rep. We went over my water test results, and the installation specs. This rep believes my problem IS a bad sensor. I now have to call a local authorized repair center to get a tech sent out with a replacement sensor.
  5. mike5906

    Sense and Dispense ORP Issue

    I find Hayward Tech Support's reply to be interesting at best. They seem to think it might be fine: Hayward Support Response: "The "Recommended mV Value" is the one that will allow you to achieve a 1.0 to 3.0 reading for free chlorine. There are many factors in the plumbing that will affect...
  6. mike5906

    Sense and Dispense ORP Issue

    I recently (3 weeks ago) added the Sense and Dispense system to my Pro Logic PS-8. I have tested the water both myself (two different test kits) and taken my water to a local pool company. All of the tests show the water is near perfectly balanced. However, my ORP sensor is reading 110mV at...
  7. mike5906

    Pro Logic PS-8, Sense and Dispense

    Right, but I don't winterize. I just let freeze protection run the system. Do the probes and tank still need to be removed?
  8. mike5906

    Pro Logic PS-8, Sense and Dispense

    Sense and Dispense, Acid Feed Freezing Weather I just recently installed a brand new Pro Logic PS-8 with Sense & Dispense and Stenner acid pump. In the S&D install manual it says the probes must be protected from freezing weather, but I know several people who say they have never removed them...
  9. mike5906

    Pro Logic PS-8, Sense and Dispense

    My 2003 Aqua Logic system was obliterated in a lightning storm three weeks ago. I just spent the weekend installing a Pro Logic PS-8, Sense and Dispense, Stenner acid feeder, and all the new wireless gear including an Aqua Pod. What I can tell you is that OLDER Aqua Logic and OLDER Pro Logic...