markdpratt's latest activity
-
markdpratt replied to the thread Intellichlor IC60 Remote Monitoring.Thanks Allen. I keep finding details out about my Intellicenter system and equipment that were either set up wrong or not setup at all... -
markdpratt posted the thread Intellichlor IC60 Remote Monitoring in Salt Water Chlorine Generators (SWG).I run my filter pump 24/7 at low flow rates to maintain continuous skimming as well as continuous chlorine generation from my...
-
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).I worked with the Pentair Technical Support to finally get to the bottom of my issue. In summary, I recently had my two Model No...
-
Yesterday's picture-day 7 of slam. Clear but not finished. I took the ladder apart yesterday, drilled some extra holes also. It is...
-
markdpratt reacted to PoolBrews's post in the thread We Have a Winner! Photo Contest! TFP Pool of the Month (April 2024); Theme - Unique Pool Features with
Like.
My feature is a Tiki Bar I built when I retired! Going on 6 years old now. I also brew beer, so there are always 3 unique brews on tap! -
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).Thanks Allen. After this Easter weekend, I will try reverting to the 1.064 Intellicenter version and monitor results. I’m not sure...
-
markdpratt replied to the thread Heater/Chiller Recommendations.Just as a point for comparison. Our pool is half the size of yours and we are in Lake Charles, LA. We seldom use our gas-fired...
-
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).I re-distributed the RS-485 cables between the available connector blocks and eliminated the pigtails (see photo). I restarted the...
-
-
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).Thanks Allen - much appreciated. I do have two free RS-485 connector blocks on the Intellichlor Surge Card on the back wall. I will...
-
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).Here are photos of my RS-485 connections. All 3 pumps and the Wireless Antenna cables are wired together and attached to the...
-
-
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).My Intellicenter firmware version is 2.017. How do I determine the firmware version for my Superflo and Intelliflo pumps?
-
markdpratt replied to the thread Erratic Intellicenter Behavior (RESOLUTION).I reset my Intellicenter using the Reset button (depressing it for 10 seconds) just below the LCD screen No circuit breakers needed...
-
-
Ever since I had my Intellicenter CB’s changed out to GFCI’s and my two feature pumps re-wired up using RS-485 cables a few weeks ago...
-
markdpratt reacted to Labradorcan's post in the thread Intex/Soft side pools- Can I use a 10Kw or (bigger) heater to the same temps as a solid wall pools? with Like.
Hello everyone, I live in Northern Canada where temperatures, even in summer, are not always hot. Due to this, I am looking for...
-
markdpratt replied to the thread We Have a Winner! Photo Contest! TFP Pool of the Month (March 2024); Theme - Scenic Views.Thanks everyone. With all the beautiful entries, we are honored to have been chosen. We have the greatest sunsets here in Lake Charles...
