Recent content by MahD

The power supply is working , I had a 12 v plug laying around I am using. I am really new to this , a picture of what the regulator looks like. What setting do I use on my multimeter. Commercial Electric MS8301B Auto Ranging Digital Multimeter Commercial Electric Ms8301b Auto Ranging Digital...

I wanted to close the loop on this. I fixed the issue with three new breakers and a new board everything is working great. I think I want to use the old board as a beginning to learn how to fix electronics. Any one know where I should start look at my board, do I start doing continuity test on...

Hey Ogdento, Thanks for the help! How do I check that? And would there be a way to fix it?

Hi Guys, So I wired the board up like ogdento said. It powers but this is what I get nothing connected. The board is kaput huh?

Oh I tried disconnecting everything from the board still nothing.

I hard wired the main pump directly to power temporarily. I ordered 3 new circuit breakers cause they were hosed and a new board(used one from Amazon). I am going to try and replace the breakers first, if I get power to the board after that and everything works cool. I'll just return the...

Hey Jim, Things I have tried I disconnected everything but just the transformer and still nothing. I disconnected the j20 nothing. Will the link to that Amazon product work for me Jim? It looks the same I am not sure it will work. Here is the link again . Thanks again for all the help...

I'm also trying to find the part number for the board to see how much a replacement board is

Hey Jim, Thanks for the response. No power on the j20 com port, there is power coming out of the transformer. I think next steps getting replacement relays. I had to hard wire the main pump so pool water still circulates. I talked to tech support, they think I need a new board, but he didn't...

Hi All, Can I use these as a replacement https://www.amazon.com/dp/B007Z7UPMY/ref=cm_sw_r_sms_apa_i_VV4GEb4ZWKKRJ

Hi Jim, Here are the pictures. The picture with red circle that is where you want to me to check the volts right? I don't see the pins you are talking about!