Recent content by maggiesfan

I totally agree with tangled cord, I find if I take the time to lay the cord out untangled before putting the robot(Madge) in the pool it helps a lot, when I take it out I coil it like I used to do with my climbing ropes and get all the kinks out.

I ordered this one from marina pool and spa Polaris R0897800 Fine Filter Canister and it does a great job of getting the fine dust and sand, the one that came with it did not pick it up, now the filter has brown muck in it.

It does to me, but then I’m a Pom😀

Thanks for the reply, I picked some up from economy Pools two weeks ago, it was HASA and very yellow looking, although they didn’t have much of it in stock, hopefully next time I get some it will look like Vodka 😀

Hi JoyfulNoise, where do you get your MA from?, the last lot I got from HD was very yellow. thanks

I use #1 for configuration changes and the mobile app for anything else, however I have been known to use the intelliCenter panel to change the SWCG percentage, reason being, where I run my weekly water tests it’s right next to the panel so it’s handy for me.

Well, I went out to do the test again and this time I gave the reagent bottle a good shake and now I get 7.8ppm, which is what I was expecting, previously I tested twice using five drops but got the light pink result. Thanks for the quick reply.

My ph test is a very light pink, I’m using a Tftest kit, the reagent is good until 10/23, any help appreciated.

I have been running the Smorobot X11 and the Betta2 for 4 months now and they play nicely together, I always run the X11 in floor only mode, which means charging it to 7 solid green lights and turning the on/off switch to ”S” it runs approx 2.5 hour. takes about 40 minutes to get to that stage...

I pretty much use floor only cleaning on my X11, the way you do that is to only charge it up to when 7 green lights are solid and the 2 outer lights are flashing green, once you see that disconnect the power cable, select ‘S’ on the power switch when you put it in the pool, and it will only...

My ultra fine basket picks up pretty much everything, loads of desert dirt, leaves and little beasties, it does a better job than my dolphin S300i ever did.

Today I received the fast charger, a standard basket and an ultra fine basket, these were freebies when I bought the X11 via kickstarter, so I have two of each baskets. Next time I charge the X11 I will use the faster charger so I can assess the difference in charging time, and to see just how...

Sorry it didn’t work out for you. My X11 is still going strong 🤞🏻apart from the one time I got the red light shut off, it’s been doing a great job of scooping up all the beasties that make their way to the bottom of the pool, especially after Sundays deluge, the fast charging time and run time...

Glad you got your replacement, and it’s working fine, I agree with you regarding the “F” fast option, I don’t use it either, gave it a try just to see what it did, won’t be using it again, I charge mine to 7 solid green and select standard “ S” so it just does a 3 hour run on the floor, does a...

My X11 hasn’t flipped over yet, but then I mostly do the floor only.