Recent content by LV Desert Pool

that would be helpful. last measuree at the pool shop using their AccuBlu automated system- 4400

I have a 13,500 gallon pol with 500 gallon spa, SWG since it was new over 32 years ago. Last fall when I did the fall service the salt level was 3600. I have a whole house water softener using regular salt that also fill the pool Is the salt content of the soft water enough to raise the salt...

I'm pretty sure these are made in a mold. I ran a straight edge at every angle- to see if in fact there were high spots- nothing high or low to the naked eye. I have some synthetic rubber isolating pads that I think will do the trick.

I just started on a project to remove my 33 year old RayPak and install a new Pentair Max E therm 400HD. Once I got the new concrete equipment bases in an leveled leveled I started placing the equipment. When I got to the Max E therm I got it placed on the bases and the thing wobbles like a...

Thanx Guys. Pentair Tech support's guidance was to "ask the inspector". DS

Getting ready to install this Max E Therm heater and can't find anything in the instructions on whether I can run the RS-485 com port wiring in the same weathertite conduit as the 120/240VAC wiring going to my Intellicenter?? My concern is to insure that the EM from the high voltage may...

I have had an Aqurite (AR) chlorinating system installed on my pool for probably 15- maybe 20 years. Last year I upgraded the Pentair automation from Suntouch to Intellitouch (IT) . I replaced the AR control box at the same time- the original has some dark areas on the PCB and the tranformer...

Just getting started on this forum. I have been a "happy" pool owner for 30 years. It was built shortly after we moved in to our new home. 13,500 gallon in ground with 500 gallon spa, Pebble Tec finish. I started with Jacuzzi equipment which has been replaced over the years. I am currently...