Recent content by luna31d

Why would you want to move to a state without licensing? For most professions, having a licensing requirement equals more money. Looks to me like Pentair is joining Zodiac (Polaris) in a 60 day warranty for equipment installed by someone other than a certified professional. Hayward is...

Paul, What is a "certified professional"? Here in Texas pool builders do not have any licensing requirements. Does one have to take a class from each manufacturer?

If your builder has not finished the pad plumbing. Have them put a T fitting in the return line. Use a slip/female thread/slip. Put a plug in female thread. When you install the Stenner the injection point is threaded. You may need an adapter to get the size correct. No drilling or tapping...

Forgot to add. I have a 15gallon tank. I was able to go on a 10 day vacation this summer and did not have to ask anybody to add bleach. I can probably go a little longer, since Walmart and HEB bleach is now 8.25% vs 6%. Last summer I left for 10 days and the Liquidator decided for some...

I agree with Bama. I tried the Liquidator and a variable speed pump. I tried many different configurations and could never get consistent CL flows. I have a single variable speed pump, no spa but do have a water feature that spills into the pool and a bubbler in the sunshelf. The pump is...

Larry, I don't think it is going to drain with the pump off, when your pump is lower than the pool water level. It will raise the float to exit to the pool, but won't go anywhere. With the pump off you can add bleach until the water reached the top of the Liquidator, the next time the pump...

To setup a higher speed for skimming you have two options: use an aux button or a feature. Define the aux button or feature, then assign to one of the pump speeds, then program schedule to activate. The aux button or feature can be added to the valve control later. I used the Aux extra...

Bill that's correct. Set Aux 4 to Valve A When Aux 4 is ON Valve A will rotate to the cam stop in the direction selected by the switch position on the actuator. When Aux 4 is OFF Valve A will rotate the opposite direction to the other cam stop. Yes, leave the actuator switch in the same...

I will bet that the junction box with the flex conduit is in your case the equivalent of a light deck box. It needs to be raised up to meet Code and to prevent flooding. Good thing is that with the flex conduit it can be raised with not a lot of trouble. This will require new conduit between...

Bill, Under Settings go to Valves. You should see valves A and B. You then assign a circuit to the valve. For example, Valve A = AUX 4. Whenever AUX 4 is on Valve A will operate. The direction of the valve rotation is determined by the three position switch on the valve itself...

Txmat, I can make you a great deal on one if you decide to go that way. I used mine for 3 months and am just north of San Antonio. PM if you are interested.

Any ideas for finding 12% bleach in the San Antonio area? Thanks,

GOOGLE water level. You can make one with a milk jug and some tubing. If used carefully, it can be very accurate. I used one to set my coping when I built my pool. I have a transit but this was easier when working alone.

All pool equipment that is conductive (metal). This includes: Rebar for shell , deck rebar, light niches, heaters, pumps, ladders, handrails, metal portions of permanent pool cover mechanisms.

This is the way I set mine up. Pentair VS pump - Connects to communication bus for control and renders relay #1 useless. Polaris pump - Relay #2 Intellibrite lights - Relay #3 Water feature light - Relay #4 I have (2) Intellibrite lights and both are connect to the same circuit and to relay...