Recent content by Kellie00

I see the the discrepancy--I put in the exact gallons listed on my pool manual (3876) . At the time of setting up my signature I rounded up because I couldn't remember the exact number. I also had different goals listed. Thanks for all of the help. Just when I think I have it completely...

Yes, I did pool math. It was actually 20 oz of stabilizer and 18 of baking soda (weight). I went down a few oz in the stabilizer so it wouldn't go too overboard and I could recheck once fully dissolved. My CYA goal was set at 70 and TA goal was set at 60. Should I be shooting a little higher?

Does adding 15oz of baking soda and 15 oz of CYA sound right to you?

Thanks!

So I need to raise my CYA and TA. In raising the CYA it will lower my pH. What is the best route for this. Add both CYA and baking soda and adjust pH after? Tonight's results CYA 30 TA 40 pH 7.2 FC 4.5 CC .5 TC 5

I don't think our SWG can change %. Oh!!!!! Do you know what? I don't know why I thought was supposed to be higher. It's between 3-5, right? Send me back to pool school. :wink: I am seeing two different levels for for the CYA. We are currently at 30. This link shows it should be...

FC is 4.5 CC is .5 I know I can just add some bleach, but I'm wondering if I run the SWG a little longer will it have the same effect?

Good to know, thanks for the reply! I just ordered it so we will see soon enough! Keeping our fingers crossed!

I found this on Amazon and I'm wondering if anyone knows anything about this. I don't want to spend $300+ on a pool vacuum, so was looking for an inexpensive alternative. Does anyone have one of these? Do they work well...

Wait, didn't that just say 20oz above? Now it says 12oz? Okay, I thought I was seeing things, ha! I appreciate your help and patience!!!

That's perfect! I couldn't wrap my head around one chemical raising the other and trying to get them both in the right spot without going over. When it says 20 oz is that weighed or measuring cup?

I closed out my browsers and restarted and the calculator is now working. Phew! Thanks for bearing with me. One more question--because we are raising the pH and TA -what is the best way to do this since, from what I understand raising TA will raise the pH. Should we just start raising the TA...

You are right! I'm translating my husbands notes it's FC 6.5, CC 0, TC 6.5 I'm getting confused. To change the TA I'm not sure what to do. I'm entering this into the Pool Math calculator and nothing is coming up. The same for FC -nothing is popping up what to add. So I need to up the...

Okay, will give this one a whirl. Since it is vinyl should I even worry about testing it? Another question! I'm getting a TA level of 30. I see that it should be between 100 and 120. I'm not seeing what I should be doing for this. Our pH is a little low at 6.8. Actually, I'll go ahead...

Good afternoon! We are just setting up our 15ftx42 inch AG pool with SW generator. We are doing our testing for the first time this season and we can't remember if we are doing the CH test properly. So far, the only thing in our pool is salt and CA (cyanic acid) dissolved via a sock. We are...