Recent content by justducky21

Help! We got a hard freeze randomly, down to 20 degrees when weeks before we were up in the 60s. So since we didn't close the pool all the way down we just ran the pump overnight like we have done in the prior year, well it looks like the seal from the pump to the DE filter popped (not sure...

Has anyone had any issue with the Dolphin scrubbing some of the Vinyl print off their pool near the water line? I thought it was scrubbing the waterline a little too aggressively but if I use a stiffer bristled manual hand brush it still takes some of the print off just a little less so- so...

The 4x8 lean - to is exactly what I need! do you have any drawings or plans that you did?

Back wash while during SLAM... frustrated How many times is normal? I can't seem to go more than every hour before the pressure is high and I have zero flow. I am not sure what todo especially during the work week. I have been setting it to recirculation and putting the bot in. I feel that...

yeah, I am currently doing the SLAM process so I am trying to filter the dead algae but it quickly loses flow. But I don't see the PSI increasing from backwash to filter seems pretty steading @25.

Okay so I went back over all the exposed PVC pipes with glue/sealant and now when I set the valve to filter I have no suction issues i.e. bubbles in the basket. But it seems now I have a flow issue hardly anything is coming out of the return jet. I am going to backwash (even though I just...

I read that previously, which is why I replaced the Oring on the pump basket and it fixed the bubbles when on re-circulate but not when I set it to filter so I assumed it had to be another air leak somewhere between the pump basket and the inlet of the filter. Would I need to replace the spider...

Filter grids looked good, no breaks or holes and didn't seem brittle, just dirty. I don't remember what it was before cleaning but its 25 PSI right now. Where should I look for a suction side air leak? or what types of things should I look for a restriction inside the filter? I looked to...

doesn't appear to be, just removed and re-teflon taped it.

Hi, Everyone! First Post here. Wow, I have learned a lot in a little time a lot of info learned via this site -couldn't be more thankful. So as the story goes, we bought a house in 2016 the previous owners had it opened for us when we moved in, we were able to enjoy 2.5 months or so of...