Recent content by Juliogt86

  1. J

    How do I plumb 1.5" pvc to my skimmer and return??

    I thought of adding another return as well when I setup the pool but I hadn’t planned for it then. May eventually do it. Let us know how it goes.
  2. J

    How do I plumb 1.5" pvc to my skimmer and return??

    I tried using the step drill bit, wasn’t too clean of a cut but it worked. Knockout should work.
  3. J

    Stenner Pump - Is a check valve needed and using tablet chlorinator as an injection point?

    Ha! User error. The little blue cover on the pump was not properly set. I did a dry test now and no backflow into tank. So as long as the psi at the injection point is not greater than the pump rating, no check valve is needed!
  4. J

    Stenner Pump - Is a check valve needed and using tablet chlorinator as an injection point?

    Thats what I thought! I came home to and overflowing chlorine tank. I was also told a check valve was not necessary. 😔
  5. E8E92B03-84FC-4307-82D9-3C4D92997BEC.jpeg

    E8E92B03-84FC-4307-82D9-3C4D92997BEC.jpeg

  6. J

    How do I plumb 1.5" pvc to my skimmer and return??

    Success! Just finished it up. Used a 2 3/8 step drill bit.
  7. 32ECDB3C-8A73-4658-BC55-D82ADFFB7948.jpeg

    32ECDB3C-8A73-4658-BC55-D82ADFFB7948.jpeg

  8. J

    How do I plumb 1.5" pvc to my skimmer and return??

    Its either that and have to make a new cutout on the pool wall to fit new skimmer or this. This is much easier.
  9. J

    How do I plumb 1.5" pvc to my skimmer and return??

    Its been a while from this post but this is what I am up to. See attached. I will be cutting out a bugger hole at the bottom of the skimmer and will install a return fitting without the eyeball part and then I will be able to attach a threaded 1.5 in threaded by 2 in slip union which will then...
  10. 9B69BCB7-F7A4-4434-96A6-C62C5A7E072B.jpeg

    9B69BCB7-F7A4-4434-96A6-C62C5A7E072B.jpeg

  11. F4AEBAED-E6FA-4B07-A9F2-58DEC69EEA91.jpeg

    F4AEBAED-E6FA-4B07-A9F2-58DEC69EEA91.jpeg

  12. J

    1.5” or 2” plumbing?

    Hello, been searching and searching on this topic everywhere and would like more opinions on this. I’m debating if I should run 1.5” or 2” plumbing. Taking into consideration efficiency and any possible future equipment changes. Will be running underground and pouring a concrete slab so trying...
  13. J

    Swapping cartridge filter inlet/outlet

    Hello again! Now debating if I should run 1.5in or 2in plumbing. Will be running underground and pouring a concrete slab so trying to decide. Pump/filter will be about 15-20 ft away. (1.5hp pump 100sq ft cartridge filter) What do you guys suggest? Thanks!
  14. J

    Swapping cartridge filter inlet/outlet

    Mission aborted! I have no issue doing the extra plumbing, it was just a quick thought of if it was possible for convenience. Thank you guys for the help!
  15. J

    Swapping cartridge filter inlet/outlet

    Hello everyone. I have a waterway clearwater II cartridge filter. Can I switch the inlet and outlet sides? The way I want to set it up, to have the drain port face to the front, and to avoid having too many plumbing turns, it is more convenient for me to flip the whole thing around and just...