Recent content by joseroman1014

DrHorshenschwartz Thanks. Going to buy this Right now. Keep you guys posted.

Its a new installed pool. 2 month old. My first Mistake was letting the install Company do their "Free Chemical Startup and Balance". I think they never added anything in there. I did ask about the additions before he left and they claimed they use all liquids for their additions. Now what...

Kids overwhelmed me last night (LOL) so I couldn't post but here it is. Results Well just as I expected. I tested the water as soon as I got home and my results were FC-0 / CYA 30? CC - 0? is that correct As for the CYA the water is clear no haze so I'm assuming there is no CYA in the pool...

I try to use the 25ml its easier for me that way. I do see it mentioned here several times to double check my test kit. I did that this morning and it seems all the bottles either have a date ending 2018 and some 2019. could there be a possibility that the powders I use in the kits with the...

Yes Sir Right Again! I corrected that with last nights test. Ill be more careful with my post. Ill slow down a bit. Blind in one eye so I'm trying my best.. Sorry guys.

jblizzle Your right.. it was 12 drop to clear. times that by the .2 and you get 2.4. Guess I have to slow down the typing a little.

Thanks... Found it. ill be there Soon!

I saw a higher concentrated pool chlorine at lowes that was at 10% hypochlorite. its from Pool Essentals? Can I use this.

Well guys these are my results from this morning test after last night add of Chlorine bleach. FC - 2.3 CC - .4 PH - 7.2 CYA - again 30 - bubble doesn't even disappear. Slight haze Now this is what I found that has me intrigued. The Pool Bottom is super clean the walls don't feel slimy but I...

Sounds like a plan. I took The Pool Vacuum out the water. The Stairs are bolted in so that I cant do. While I was out there I took a new reading. these are my results FC - 3.5ppm CC - .5ppm PH - 7.2ppm CYA - 30? The bubble never really disappears but I get to 30 it is a bit hazy though. - -...

Pool is a Vinyl Above Ground 24 x 52 with 15200 gallons of water according to the Calculations on Pool Math. I thought it was 15400. Its a new setup. Only set up about a 2 month Now. I came from an Intex 20 X 42 Steel Frame pool with a Salt Water Generator. The Bleach I'm using is Plain CLOROX...

Guys please explain to me the theory of what is going on here. So far I have with out exaggeration spent roughly 200.00 and roughly 40 bottles later I cant get this pool to hold any chlorine. Night before my reading were FC - 0, CC - .3, PH - 7.2, Total Alkalinity - 90, CA - 110, CYA 30...

Yes ill update my signature. Been a bit busy. Yes they added all the chemicals after their initial free test but that's it I'm going to handle it all myself. by the way Water looks clear. - - - Updated - - - Yes I'm going to slowly try to get it there. My next test is tomorrow. I added...

Guys Here are the results of the test using the taylor kit Free Chlorine - .5 Combined Chlorine - .5 Ph - 7.2 Alkalinity - 110 calcium hardness - 100 CYA - 30 This is after a full two days of rain. Any suggestions