Recent content by John_and_Val

Are you planning to keep these on your doors and windows as a legit safe-guard for pool area entry? or are you just needing to pass inspection. I ask because I have a bunch available....

Are there plans for a larger transformer? And will it still be the plug in type like they have now?

How many phillips hue lighting do you have attached off of one plug in transformer???? I am interested in doing hue lighting in my front yard....

Screen and water depth play a big part in your temperature. Also, how much direct sun is a concern (but remember, the screen cuts out some sun). I am in South Florida and have about 26000 gallon pool, that gets blasted with sunlight from 10am to 7pm. Without the chiller the pool is hitting 90 as...

What did they ever do for the in pool table top.... I saw they poured the pedistal (I assume out of 12" silo tube)......but I see no re-bar stubbed up? Did they tie the pedestal in with the shell? What are their plans for a top?

Sorry for confusion, This should all be pre programmed by the system after you tell it the temperatures you want to achieve. It will (in my case) switch from heat pump to gas heater when it feels the heat pump is not performing efficiantly(I havent seen this actually work yet). So if i was to...

The way the Intellicenter is designed is for fully automated heater function. You tell it - keep my pool temperature at 87 degrees. No matter how it has to do that (by heating or chilling), it should be fully automated. And I don't think it it just the push of a button like you...

I believe there is some way for a valve delay...........and a heater cool down program already built in to the program......but no way of making it work the way they have it set up

@MyAZPool and all other Pentair Intellicenter and Heater Users So, you buy this over priced automation system........expecting it to "run the world"...... and in reality it has major issues and bugs. One bug in particular is this: I have a heater bypass valve with an intellivalve hooked up...

Here is a sound piece of advice on pool finishes.......... Budget for it early - know what you want before you get to the end of project. I say this because the pool finish is the last thing to be done in the pool build....... and that usually equals "NO MONEY LEFT"!!!!! So if you think you...

Here is a sound piece of advice on pool finishes.......... Budget for it early - know what you want before you get to the end of project. I say this because the pool finish is the last thing to be done in the pool build....... and that usually equals "NO MONEY LEFT"!!!!! So if you think you...

Jorge, your blower is too powerful for your system - you need to divert some of the air going to the jets. Cheapest way.....make cuts in the 2" pipe going to the jets until desired mixture of air and water is achieved. Best way....Add a 3 way valve on the pipe below the blower. Add a section...

Plug all 3 now to prevent damage to threads (the 2 for pump should of already been plugged and system should be under pressure)........ gunite crew should leave a couple of holes in floor and walls, as relief (most companies in South Florida will not shoot a pool without them). When finish crew...

Is it consistent on when it shuts down? Is it random, is it every 2 hours, etc.... I ask to rule out that there is possibly an egg timer setting????