Search results

Are you planning to keep these on your doors and windows as a legit safe-guard for pool area entry? or are you just needing to pass inspection. I ask because I have a bunch available....

Are there plans for a larger transformer? And will it still be the plug in type like they have now?

How many phillips hue lighting do you have attached off of one plug in transformer???? I am interested in doing hue lighting in my front yard....

Screen and water depth play a big part in your temperature. Also, how much direct sun is a concern (but remember, the screen cuts out some sun). I am in South Florida and have about 26000 gallon pool, that gets blasted with sunlight from 10am to 7pm. Without the chiller the pool is hitting 90 as...

What did they ever do for the in pool table top.... I saw they poured the pedistal (I assume out of 12" silo tube)......but I see no re-bar stubbed up? Did they tie the pedestal in with the shell? What are their plans for a top?

Sorry for confusion, This should all be pre programmed by the system after you tell it the temperatures you want to achieve. It will (in my case) switch from heat pump to gas heater when it feels the heat pump is not performing efficiantly(I havent seen this actually work yet). So if i was to...

The way the Intellicenter is designed is for fully automated heater function. You tell it - keep my pool temperature at 87 degrees. No matter how it has to do that (by heating or chilling), it should be fully automated. And I don't think it it just the push of a button like you...

I believe there is some way for a valve delay...........and a heater cool down program already built in to the program......but no way of making it work the way they have it set up

@MyAZPool and all other Pentair Intellicenter and Heater Users So, you buy this over priced automation system........expecting it to "run the world"...... and in reality it has major issues and bugs. One bug in particular is this: I have a heater bypass valve with an intellivalve hooked up...

Here is a sound piece of advice on pool finishes.......... Budget for it early - know what you want before you get to the end of project. I say this because the pool finish is the last thing to be done in the pool build....... and that usually equals "NO MONEY LEFT"!!!!! So if you think you...

Here is a sound piece of advice on pool finishes.......... Budget for it early - know what you want before you get to the end of project. I say this because the pool finish is the last thing to be done in the pool build....... and that usually equals "NO MONEY LEFT"!!!!! So if you think you...

Jorge, your blower is too powerful for your system - you need to divert some of the air going to the jets. Cheapest way.....make cuts in the 2" pipe going to the jets until desired mixture of air and water is achieved. Best way....Add a 3 way valve on the pipe below the blower. Add a section...

Plug all 3 now to prevent damage to threads (the 2 for pump should of already been plugged and system should be under pressure)........ gunite crew should leave a couple of holes in floor and walls, as relief (most companies in South Florida will not shoot a pool without them). When finish crew...

Is it consistent on when it shuts down? Is it random, is it every 2 hours, etc.... I ask to rule out that there is possibly an egg timer setting????

Center is for hyrostatic relief............will be plugged.

So about a month of letting the pool "run its course" and hear are my findings: I lowered my CYA to 50 - 60 My CH is around 300-350 My TA I maintain around 50 With those numbers I have a FC between 6 - 7 with no CC The pool is crystal clear, and pH is rock solid 7.7 with little adjusting now...

Bump.....

No ground anywhere in the system??????????????????? Some people say the ground to earth will do via the gas line....... Just doesn't seem right..... Hope someone can help me.....

It comes with a 24VAC transformer. The transformer has no ground wire - the igniter (pictured above) has no ground wire. This installation goes as such: The transformers for the 3 fire on water bowls will be mounted in a NEMA 4 PVC enclosure. 20 Amp Breaker in an intellicenter/load center...

Ok, so if I have voltage drop on the landscape lights, then i could up the voltage on transformer....

In regards to 100W and 300W Pentair Transformers - they have a 12 13 and 14V configuration. Can I hook my intellibrite 5G's up the 14V wiring to get a "brighter" light in my pool. Same questions for the landscape lighting (Pentair landscape uplighting). why else would the option of Voltage be...

Nevermind.........found the manual and they have a chart with the info. I also noticed something I have another question about. Will post seperate.

Anyone know how many watts each one of these pull?

Funny you mention that....I purposely have the pump run at the lowest setting possible allowing the SWG to generate. If I kick the pump down to 900 gpm, the SWG turns RED (not producing).

Inspected and it is clean....no clogs or debris. I honestly believe that there is not enough pressure in the system to "force" the water up the required 3 feet or so to the gauge. which makes me wonder - how much water is going through the cartridge filter? The pool water is as clear as it has...

And keep pH at about 7.6 - 7.8? Forgive me, but why is CSI not important?