Recent content by jliddil

  1. jliddil

    Another Tampa Bay new build - input and thoughts on design/costs

    Don't skimp on the screen for the pool.
  2. jliddil

    New pool finished about a month ago; could I have some help please...

    Were they brushing every day? Have you backflushed/cleaned the filter?
  3. jliddil

    Resurfaced pool still cloudy

    So deep cleaned the filter. Took quite a while to get all the Crud out. I attached a piece of PVC to my hose since the hose get bending. Every time I stuck in gently a cloud of brown sediment came up. The pool store guy said it will never work. Wanted to sell me sand. I left. So now my pool is...
  4. jliddil

    Resurfaced pool still cloudy

    Thanks. Doing that. The water is opaque after over 20 minutes. So this is going to take a while
  5. jliddil

    Resurfaced pool still cloudy

    So I added some DE to see if the filter was "filtering". It came right through into the pool. So I decided to clean the sand. I've just start and I found lots of brown fines came up. The sand is total compacted in places. I have cleaned the filter regularly. When the pool place start the pool...
  6. jliddil

    What am I doing wrong

    As an ex-bench chemist it cracks me up to watch the way they titrate in stores. They over shoot all the time. I only have them test so I have a written "record" is my installer says something about my problems. My favorite trick is to fill my bottle with distilled water and take it in to the...
  7. jliddil

    What am I doing wrong

    Blame the store
  8. jliddil

    Resurfaced pool still cloudy

    So run the filter for the remaining two weeks of the cure and if it does not clear, SLAM?
  9. jliddil

    Resurfaced pool still cloudy

    So let the pH rise, add some calcium and run the filter 24 X 7?
  10. jliddil

    Resurfaced pool still cloudy

    New pebbletec surface at end of week 2 CYA 60 CL=7 CH=200 Alk=60 ph 7.4 Pool has gotten progressively cloudier. Brush twice a day very little dust. Added an ounce of Jacks Magenta every other day Upon start up the shop added a full quart of Jacks blue that immediately turn the water hazy brown...
  11. jliddil

    Resurfaced pool and slight opalescence

    So now at almost two weeks post fill. Still some slight haze. More patience?
  12. jliddil

    Resurfaced pool and slight opalescence

    Had a new pebbletec surface applied 8 days ago. Start was with Jacks Magic Blue by the pool dealer as recommended by PebbleTec. Just tested this AM. Water is still slightly opalescent. Been brushing twice a day. Very little dust gets kicked up at this point. CYA=60 CL=4 ppm (using liquid...
  13. jliddil

    Full chip out required for pool renovation and resurfacing

    Getting my pool fully chipped out.