Recent content by jfdudek1

No, that was not it. The 2nd time that flashes is about 2hrs and 10 minutes ahead of the correct time... it advances in synch with the correct time that I programmed.

Ah, ok. Let me go check that. Thx!

Afternoon Pool Gurus, quick one here. I went to adjust the Date and time on my VSF pump and was able to correct the date, but the time is now alternating between the correct time I just set and Saved, and a different time: 12:48AM and 2:05PM... Just keeps switching back and forth on the...

Thx. Will try Jim

Thx. Yes it was working, and just stopped. I do not have Screen Logic. I have the antenna, but not the rest. Guess the previous owner or real-estate broker took it. Thx! Will try.

I have the Pentair Easy Touch panel and the valve actuator for the water fall stopped working. I just installed a new actuator, but it too is not responding. Plugged into AUX port A, "vlvA", and when I move the switch on the unit from Off to ON1 or ON2, the actuator rotates. But nothing...

Regarding the waterfall, it is off and under the tarp, but I have the valve actuator set to "Freeze", so it will open and run when triggered,correct? So that the water in the exposed pipes at the filter will not freeze. That is my thinking. But again, this is all new to me. Thanks again for...

10' water bags hold the tarp down. No issue accessing the pool itself. Very cool. Thx Herman.

Thank you. I will move the floater to the pool, and switch to liquid chlorine after I have used all the tabs.

Ok, thx. A very cheap blue tarp....

This is my first winter with a pool and am not sure about the circulation.... Saltwater, chemicals are all balanced, pool is covered, I removed the cleaner, put a couple chlorine tabs in a floater and put the floater in the skimmer. I have a VSP and the pump, cleaner, and waterfall are all set...

Thanks everyone! Great info and response! Much obliged.