Recent content by hotingeorgia

Hi all, We just installed a fiberglass pool with a tanning ledge. We didn't install a railing because you are only stepping down into a foot of water so we didn't think it was necessary, but now that it is installed it has proven to be slippery. Are there any other options besides a railing...

I slammed the pool successfully. The SWG was not making chlorine, it was sucking in to much air from a poor install job. Everything is tightened up and now it's working so well I've been working to get the FC below 10. Thanks guys!

Haha, good way to look at it. You guys are great.

Fuldo, Thanks for the feedback. I've heard mixed on this some users seem to push only running it enough to maintain FC as little as 4 hours depending on size: How Long to Run a Variable Speed Pump I have a smart usage rate based on load and time of day, I run the pool when nothing else is...

I'm going to SLAM it today to end the algae. after that it looks like my SWG makes 1.15lbs and hour., my pool is 7,300 gallons. So at 80% to keep an FC of 6 with a CYA of 80 i'm looking around 9.5 hours if my math is correct? Thanks again for all the help.

Jim, Thanks for the reply. The info on the salt cell is very helpful. I based my run time on what I saw others saying they ran there SWG for on the forums. I'd assumed that would work for me, you know what they say about assumptions...

Thank you for the quick reply! 1. Water is blue and you can see the bottom but is very cloudy 2. I just ordered a proper kit, I've been using test strips (embarrassing) 3. I still searching for a good salt kit, I don't think the Taylor K-2006C test kit includes a salt test. So I'm open to...

Greetings, I just had a 7,300 gallon fiber glass pool installed. After reading TFP I was all excited to get started, trouble is I can't get my FC to stay at the recommended ranger. I have a Purechlor SWG and superflo vs. Based on what I've read here I've been running the superflo vs at...