Recent content by gbraillon

  1. G

    Air bubbles in some return jets

    Correct ! There was a DEL Ozone system that I took out of the wall a couple months ago. The cap is now tight and no more bubbles (almost)
  2. Capture.jpg

    Capture.jpg

  3. G

    Air bubbles in some return jets

    When I tried to open the cap, there is no water going out of it. I can only hear air. Also I forgot to mention that there was a Ozone system but I took it out since it was not working I found this schematic online and it looks like it ...
  4. IMG_0884.jpg

    IMG_0884.jpg

  5. G

    Air bubbles in some return jets

    Here is a picture of the pool return line out of SWG. Depending on how tight the green cap is there will be bubbles or not...
  6. G

    Air bubbles in some return jets

    As you can see there is some kind of by-pass on the return line. The SWG goes out to two different lines (pool and spa). The return to the pool has a by-pass with a smaller section and a green cap (see bottom right). Do any of you guys know what this is for ? When the cap is loose I can hear...
  7. G

    Air bubbles in some return jets

    No it's more a steady stream of small bubbles. And yes they are the two pool jets close to the pump. But the spa jets are even closer and none of them have bubbles. I also noticed that the flow is cloudy at the jet (but that might just be the bubbles that makes it look like it). - - - Updated -...
  8. G

    Air bubbles in some return jets

    Good morning everyone ! I had to come up with a new problem ... I replaced the main pump last week (from 3/4HP to 1.5HP) and I noticed that there are some air bubbles going out of 2 jets (out of 12). They are located in the pool. I have 6 jets in the pool and 6 jets in the spa. I would...
  9. G

    Pump replacement

    Soooo here is the new pump: https://www.youtube.com/watch?v=eiqD9GSAVd0 It sounds so peaceful :D Also I noticed the pressure on the gauge of the filter went from 10PSI (when I had a 3/4HP) to 18PSI with the new pump. My guess is that it's a normal behavior but I just want to double-check with...
  10. G

    Pump replacement

    Awesome ! I should be getting the new motor today. I will try to install it this weekend and I will let you know how it goes !
  11. G

    Pool level going down

    I am the kind of lucky guy to have a leaky bucket ... I put the bucket out of the pool to see if it's leaking and it's not. It was over 24 hours. But temperature and humidity were high
  12. G

    Pool level going down

    Good morning, Bucket test from last Friday: - Bucket lost 3/16" - Jaccuzi lost 1/8" - Pool lost 1/8" The bucket loses more water than the pool ... Temperature was around 75 degrees in Houston area. Does that sound real for you guys ?
  13. G

    Pump replacement

    UPS Tracking says delivery on Feb 4th ! It sounds even better like that! I will keep you posted about the warranty thing but I believe it should come with a warranty from Hayward. Also I noticed that the pump was not bolted to the pad. It was just held by the pipes. Do you guys recommend to...
  14. G

    Pump replacement

    Shipping is free and it says Delivery on Feb 12th which is totally acceptable since I do not need to run the pump these days.
  15. G

    Pool level going down

    The neighbor was the one who warned me about water in both our backyards. We thought it was the sprinkler system but our water meter shows no leak. Also I have an alarm on the IntelliChlor that tells me if there is enough salt so I would say no I do not add salt frequently. I only added 100lbs...