Recent content by Flori-Dan

I ended up installing a 1.5" to 3/4" reducing bushing and 3/4" street elbow with a slip coupling on the other end. I cemented the reducing bushing into the filter housing using the JB weld product described above. I PVC glued a pipe nipple I cut into the street elbow and put a valve on the...

Here are my notes, in case they help someone in the future. CCP Filter - Drain Plug Repair - The drain plug is a 1.5" straight thread plastic style plug with an O-ring to seal. - The drain plug blows out under pressure. - The threads on the plug itself are worn but not cross threaded. - The...