Recent content by FightingGobbler

Sorry was unclear with that. I meant I need to run our pump 1500 RPM for the SWG to detect flow. Any slower and the SWG stops generating. Both of those are impressive but probably overkill for what I'm trying to accomplish. I'd basically just need the "automation" system to serve as a clock...

Thanks for the replies. I've considered going 24/7 a few times over the years as I've read compelling posts from both of you guys For our setup, it would require 1500 RPM to avoid tripping the flow switch. However, we heavily use solar (pool under screen and largely indirect sun). We need...

Hello! I have an IntelliFlo pump wired for constant power. I run it from 8a - 7p set directly on the pump. I have an Aquarite SWCG run from 9a-6p set by an Intermatic mechanical timer. The pump will no longer retain its time/date settings after a power outage but will retain its speed...

Just wanted to follow up on this thread...everything checked out with the pump. Nothing at the impeller. Still having the decreased flow issue, so I suspect its something with solar. Hopefully, I can get this checked in the next week.

I read about crud at the impeller potentially causing decreased flow. I couldn't feel anything at the inlet to the pump but I didn't disassemble it. No pine needles around but we did have the pool deck pressure washed 6 weeks ago. Maybe some of that debris (all small debris because pool is...

First off, thank you for the concise explanation and ensuing discussion. My pool learning never stops! After reading this about 6 times, I think I've got it. One clarification regarding: So this means that when pump turns off, water from roof will flow down the right side to the pool as...

Today, the solar was off. Had the pump running at 2750 RPM, dropped it to 750 and I could hear and feel water rushing down the solar pipes that come from the roof. Similarly, later in evening, I had the pump running at 1500 RPM. Again, when I turned pump off, I could feel and hear water...

While cleaning pool this weekend, I noticed decreased flowrate. I have a spillover spa. Normally, there is spillover even at lowest pump RPM setting (1000). Currently, at 1000 RPM, I have no spillover nor is there water at pool return jets. At 1000, the pump is running, but its clear no or...

It's definitely still generating...just confirmed that. Was thinking of adding salt to get to actual salinity up to 3400 to try and "make the cell happy". I'm guessing once the average salinity (as measured by the cell) falls below 2500, it'll stop generating? Regarding other method of...

Instantaneous and average salinity were inline with each other about a month ago....in the 2600-2700 range. At that time, actual measurement using K-1766 was about 3400. Since, then we've gotten about 10 inches of rain here. I've drained water and added salt a few times. Could there be an...

Hi. Probably time for a new salt cell, but would like to confirm I'm not missing anything. My T15 consistently reads salt level lower than measured by about 70-75%. So questions: Based on numbers below, is it time for a new cell? If so, I'll just get a new T15. Any suggestions on a reputable...

Hi Allen, Yeah I've been brushing at least twice a day and keeping the pool robot going at least 4-6 hours/day. Also brushed out the light niches twice. It was the CC of 1 that developed near the end of the 24 hour MA shock that was concerning. I'm going on almost 36 hours of MA shock levels...

I’ve noticed that my chlorine demand has increased the past few weeks greater than past last few years at this time. Also, failed an OCLT. Water has a slight haze but no macroscopic algae. I’ve had mustard algae in the past (I think) that responded to a SLAM...but I didn’t complete the MA part...

Hi...having trouble removing an old nipple from one of my pool returns. I believe the nipple is a Hayward that would fit the SP1419A 1-1/2 Inc Hydrosweep fitting. I've tried Channellock pliers but the nipple starts to crack. I've tried needle nose pliers opened to match the grooves along the...