Recent content by -Ed

I found one for just under $400 and felt that would not break the bank. Pentair has plenty of my retirement savings already. They should have a retirement plan.

I have a surge protector that I can install on that ethernet connection. Been thinking of doing a Whole House unit, lightning is rare here but surges are not.

Here's an interesting link right here in TFP https://www.troublefreepool.com/threads/fiber-optic-pool-light-conversion-to-led-less-than-100.239691/

I did all of that this morning. I'll report back when I've had it running for a day or so. Yesterday I ordered the ScreenLogic device. I have ethernet in my pool room so I won't need the wireless part.

There is no schedule associated with. I think what I’m going to do is delete this circuit and then start over again using a different circuit and see if I get the same result.

If you still have the light, I can repair it and make it work for you.

I do not have ScreenLogic. But I can tell you that I have two schedules for my pump. Could that be triggering it?

With the WhisperFlo VST I programmed three speeds. One is for 3,000 RPM for when I run my vac. I have an open button on the Panel in the No.6 position. From the Names List I chose to rename this to ""Bottom Cleaning". From the speed setting I chose the Circuit "Bottom Cleaning" So when I press...

I found this, it is the correct item and even has an excellent photo. Onlinepoolshop.com : Pentair 21003700 FIBERworks UltraGlow 25 Perimeter Fiber Optic Cable, 200-Feet I guess I need to find someone who has substituted something that is working. Do you know anyone who has persevered to find a...

I don't have screen logic, thinking about it, though. It's a lot easier to understand than the EasyTouch 8 control panel! Thank you for your help!

Has anyone turned up a source for the original or a new version of the perimeter fiber optics for Pentair Fiberstars system? I do repairs and restoration of the head units yet have not been able to unearth a source for the fiber optic cable.

I want to program my WhisperFlo VST through the EasyTouch8 controller. I have all of the pump connected through the Com port and working. Question 1: How can I program the pump to a certain speed when the pool is calling for heat? The pump is set to run at a 2,250 rpm for most of the time. It...

I am looking for a source to replace Pentair fiber optic rope lights. The fiber part is OK but the vinyl rope is starting to alligator and turn brown. I have repaired the light source and that all works well. Ultra Glo