Recent content by DuaneR

Wow! Glad I reached out. Should have known a module would be out there somewhere. Thank you for the link.

Hayward AquaRite 900

Yes, separate box. Manually dial in %. No control wire. Photo of the iAquaLink I have pool/spa no salt control, top line.

SWG I have the RS PS4, doesn’t have salt chlorination capabilities.

Correct, my pool is probably little under 6000 so was using round numbers. My return is after the SWG, but cannot change unless I manually change % output. Same generation going to pool and spa, it is not on the IAqualink. If I set cams to 10% spa, what happens when I call for heat for pool or...

Yes I know and will look into a VS soon. Our pool builder wouldn’t budge with us about wanting a VS. Pentair sent us new DOE reports on smaller pools can use single speed under 1.15 HP… so on the cheap he used the 1.1HP. I know everyone will jump that CA requires anything 1 HP and over has to be...

New to the community! We have a new 6000 gallon pool with a small 500 gallon spillover spa with good chemistry and clear clean water. Doing 4 x 1 hour pool filtering, 4 x 30 min spa filtering per day. Also use spillover mode a couple times per day to mix water between the 2 water bodies. First...

New gunite pool and spa. Grew up with pools in the PNW but this is my first pool that I will be taking care of. I am going to have questions!