Recent content by dsalisbu

Looked like a great solution as it replaces an old pretty worn out pump and can be timed by the Pool Pilot. The controls look good, too. Sadly, I can’t find a European supplier. Something to put in my hand luggage on my next US trip?

Hi, Herman TX, I meant to add: I do have a timer! The DIG220 SWCG has its own built in timer (two variable periods per day) and it controls the present single speed pump accordingly. The pump is wired from the SWCG. The VSPs that I have looked at also have built in timers. The challenge is to...

Thanks for the suggestion. It looked a great option and Jandy pumps are sold in Europe under Zodiac brand. It would mean that the SWCG is driven by the VSP - which is fine. The smallest Jandy pump is 2hp and my pool is about 65 m3 so a bit more powerful than needed. This might be irrelevant for...

Not sure if this would provide security against no flow to SWCG but with my present set up, if I separate wiring for a new VSP from the SWCG, I could have separate switches to SWCG and VSP protected by the same circuit breaker as well as the low flow diverter on the SWCG. if the heater and pump...

Thanks for responses. I don’t use a separate timer. The DIG220 salt chlorine machine has a built in timer function that controls itself (two variable periods every 24 hours) and turns on/off the single speed pump at the same time. The air source heat pump is independent of the SWCG and turns...

Pretty standard single speed 1.5hp pump. Not well known name/brand.

Hi, I have a SWG (Autopilot DIG 220), single speed water pump and Jandy Ti5000 Air source heat pump. The timer in the SWG turns on/off the pump as per wiring in manual. The heater turns on/off the water pump when heat is needed. All three can be on together, two (SWG and water pump), two (water...