Recent content by doughboy62

Installed a new liner after 12 years of use out of the old one. Added my CYA and Chlorine. I used 1/4 inch extruded foam on the bottom. Turned out really good. Everyone was very impatient in waiting the 34 hours for it to fill. Love the pattern and the feel of the bottom.

I will likely need to replace my skimmer this spring along with the liner and was wondering if there was a better replacement skimmer available? Thanks I believe the current skimmer is a MODEL 0-2094-013

I have never used a pillow for my AGP 24' with no problems. (12years)

I will be replacing the liner in the spring time. Any suggestions on where to buy, what kind and thickness? The current liner is 12y old.

I have slammed and maintained a FC level of 7-10 with a CYA of 60. I have been scrubbing with a brush and vacuuming regularly. Any Ideas?

built an aerator. let the aerating begin!

Awesome! Thanks mknauss for the clarification!

Prerequisites: Check and adjust the PH to between 7.2 and 7.5. The PH test isn't reliable during SLAMing so make sure to take care of this before you start. I guess I was confused after reading pool school and thought this needed to be done first? if pH 6.8 is ok to start with I will start to SLAM!

Pool math help trying to increase ph from 6.8 to 7.4. Add 1.5 boxes of Borax right.

How do I post each line separately? 1 2

Ok So I drained my pool down to 2' and refilled with fresh water.Fc 9Cc .5pH 6.8Ta 80Ch 200Cya 60-70 do you round up to the highest number or count up to next line?Cl ppm 5 - - - Updated - - - Ok So I drained my pool down to 2' and refilled with fresh water.Fc 9 Cc .5 pH 6.8 Ta 80...