Recent content by Diggletree

We pushed the pool all the way to our utility easement. Couldn't put decking on top of utility lines, so raised wall. If yard was bigger I wouldn't have built it. Sent from my SM-N920V using Tapatalk

Ok I will raise the alkalinty up a bit. What about the calcium levels? Just want make sure it's not to low. I have pebble sheen plaster and want to make sure I'm not damaging anything. Thanks Sent from my SM-N920V using Tapatalk

The PH has been going down the past 2 weeks. I haven't added anything to raise it, just been turning on the fountains. A day or 2 later the PH gets back to 7.5-7.6. We have gotten about 6" of rain over the last 2 weeks. If that means anything. Sent from my SM-N920V using Tapatalk

Current results FC 8 PH 7.3 TA 60 CH190 CYA 35 Should I be concerned my calcium and alkalinity are still on the low side? I added the CYA a 2 weeks ago. I haven't done anything else but test and add clorine. Sent from my SM-N920V using Tapatalk

I understand. Good luck, I'm so glad to be finished. It's awesome in the end. Sent from my SM-N920V using Tapatalk

Our pool was finished a few weeks ago. We also had left over tile we used to outline the steps and edges. We didn't get charged for it and it wasn't planned in the contract. Sent from my SM-N920V using Tapatalk

That's pretty much what was happening. I was adding liquid chlorine after work and 24hrs later the FC was 0. I did find my pentair chlorinator was air locked. I bleed the air and retubed the water injection from the bottom to the top. I have 35lbs of tablets, so I'll use those to help the CYA...

Thanks TX splash!

My pool was filled 7-15-16. I just got my test kit K-2006C today. I live in Houston so the sun is brutal. Pool is full sun 10hrs a day. I'm trying to figure out if I should raise the CYA or wait and use the clorox 99 tablets I bought before I found this site. I have a pentair auto chlorine thing...

He said an air powered sander. Meaning powered by air from a compressor. Sounds like a decent idea to smooth the rough edges. Sent from my SM-N920V using Tapatalk

My pool was just completed a week ago. We have 4 bar stools and a ledge that over hangs. I asked the PB the same question. He called the pebble tec installers and he told me they don't put it under tables or ledges. For me it's not a problem because your legs aren't that high. I just wanted to...

We are having a Katch a kid pool net installed. Also having cool deck sprayed on the concrete. Should I have the net installed before the deck is sprayed? The net people have to drill into the concrete to install the anchors for the net. But I don't want them damaging the the spray deck. Anyone...

I am going to check with him tomorrow about using larger pieces on the columns. Maybe the installer can do a better job if they don't have to cut as many pieces... Glad your pool is looking good [emoji106] Sent from my SM-N920V using Tapatalk

I think your right Frank, I'm gonna have to live with the grout color. I think it will look worse trying to change it now. My wife and I walked the perimeter and blue taped the real bad joints. Going to have those tiles removed and reinstalled straight this time. Also both colums getting total...

They are going to tear the tops of the colums completely off and redo. Because the pieces are so crooked. Grind out every mortar joint on the pool so they will all be the same. Sorry maybe what I wrote was confusing. Sent from my SM-N920V using Tapatalk