Recent content by dferrell5

No, I was just under the impression that is what the chlorine level should be. If I test my water and post the results here, would it be possible for you to help me figure out what is needed? - - - Updated - - - Forgot to mention I have the TF 100 kit from this site.

I live here in Sunny San Antonio, TX and I am just curious about my water balance. Although we built the pool to be a saltwater pool, after seeing our friends pool stone virtually disintegrate we have held off on using the saltwater generater. My question is with manually chlorinating the pool...

Pool builder suggested 30 days before starting up the SWCG. There are quiet a few people that have the chlorinator tube and a SWG. They use the tube as a back up in the event the salt cell goes out until they can get it replaced. Need help with what to add to get the water within the right...

Forgot to mention that the pool builder says the pool is 15K gallon pool. The pool was supposed to be 18X30 but when my wife and I measured it, it is 19X31 with an average depth of 4 feet.

BattleOfYakima, Thank you for your help... I am using CHLOR BRITE, active ingredient is Sodium dichloro s Triazinetrione dehydrate and the strength is 99% My reading from yesterday are: FC 2 CC .05 TC 2.05 CH 375 TA 90 CYA 20 PH 7.8 all taken using my TF 100. Any help in getting...

Ok, just received my TF 100 kit and conducted test on water and got the following results FC 2 PM CC.5 TC 2.5 CH 350 TA 70 CYA 25 PH 7.8 Entered this info into the pool math but a bit confused on what it is telling me. "Add of % bleach. Jug size...

I updated my signature, let see i this works

Just filled our new pool last Tuesday, ( 15K gallon saltwater pool) the SWCG is of course not operational yet so I have chlorine tablets in chlorinator. PB put acid and liquid chlorine and one bottle of liquid chlorine in the pool. Until my TF100 gets her, I am having my water tested at local...

jza1736, Thank you for your post, was beginning to get really worried. I have tried to contact Hayward to get some information and was on hold all three times for over an hour beforeI hung up.I guess coustomer service for them is not important.

Wow, No responses, this worries me, makes me think I am making the wrong decision with this

So I have decided to upgrade from E command to Aqua Plus so I can get automation and a SWCG all in one package. As I look to buy the aqua plus, I find it listed as Goldline Aqua Plus or Aqua Plus Pro Logic. are these all the same or is the Goldline the older version. I just want to make sure I...

Thank you for your feed back, just one other question for you or anyone that has the Aqua Plus automation system. How many relays are needed to control the 3202 VSP? I have seen in some places that 2 relays are needed if you are controlling the speed of the pump. Need to know this to determine...

Hayward 3202

As our project nears the time for the installation of the pump equipment for our 15K gallon 17X 30 pool, I have a question about automation control that I would appreciate some help and guidance with. First, I have the following equipment, (1) Hayward VSP pump, (1) 2 speed pump (water...

Interesting, the PB told me I didn't need one too but I got the impression that I would have to have the shears would run when the pump was running and I wanted the ability to run the pool pump without the shears on. Will I have that ability with the way you suggest?