Recent content by DevilDisc

so after removin the heater and light all my left over wires accounted for and traced I have a red wire left over hooked straight into the main panel on a 20 amp breaker most responses elsewhere said it was to the light. should i remove it or leave it for another light another day and cap it off .

all wires traced and labled.RED runs to main panel ,was fo light All wires traced and labled , tested with meter , So on the pump motor color to color then hook up the switch and gfci, Curious about the white loopers to the clock though the manuals say one goes to three and mine is on two . or...

yes wires on 1 and 3 go to a breaker white goes to a neutral but another white goes out to the pool and 4 & 2 go to the pool pad box with the pump wires of the same color , what connects the plug and switch

im being extra careful power is off on timer and main box as well , im not sure why the colors are off the white goes from a to a long veritical grid on the left side with 100 holes in it aluminum i believe ill get better pics it says its a nuetral grid most of the wires on it are white or...

On the reds one goes to timer one from the timer L 4 to the pool pad and one from the main breaker the single thats off in the pic to the pool pad or Post with the plug and switch boxes on it

put a new gfci recepticle in and a Switch for the pump motor . it had a switch on one side for the light and a recepticle , and a switch one the other for the pump , and a junction box that was also holed out to go to the either the plug on the other side also I think the a red went to...

Okay here we go Two reds from pool pad go to Load 4 and one to breaker box . says 20 on it . Two black wires one from double breaker to Line 1 and the other from double breaker to line 3 , says 15 on the breakers .One black wire from pool pad to load 2 . One white wire from A goes to bonding...