Recent content by danny_b

I'm having the same issue as sbcpool, the original bypass cell doesn't fit threads. I purchased RJ60 June 8 2020. They have sent me a additional bypass, however it doesn't fit. I clean cell once a year so I called them and they said they would send another but I'm pretty sure it would be the...

I checked my CYA, it is 55. I will dissolve some more stabilizer in a sock. get it up to 75-80.

Ive seen a couple of these threads, but I'm running my unit at 100% six hours a day, and it should, by my calculations, give me 1ppm per hour ran. 3.1lbs of chlorine produces per 24hrs , is this maybe in super chlorinate mode? I'm am going to do and OCLT tonight to rule that out.

No, I didn't see any tag, but this pool is 30 years old, and i've only bought the place 5 years.

Thanks for everyone's replys, I'm trying not to replumb the pump....basically if I cut anything I have to replace all valves, pump everything because there is no room to glue on anything... Probably 1500$ or more undertaking with pump, valves, etc

Just spent a wad of cash for circupool rj-60, and being my first SWG, do I need to protect the control box and cell with a shade cloth from the harsh phoenix az sun.

I cant find any markings on the pump at all, only on the motor, which has obviously been replaced. The 3 valves are on return side. Why should they get replaced? they go to scuppers.

I looking to maybe upgrade motor to variable speed, I was hoping to swap the motor and leave the pump. Does anyone know what pump this is?

Ok, I think I may go with the RJ-60, I try to run my pump the least amount possible. By my calculations I can put 3-4pm in a couple hours.

I think I'm going to go with the RJ-45. Curious if what increments you can adjust the production. Also, the flow sensor, if you removed it from the T, is in the same size as my stenner injection point?