Recent content by d_red1

  1. D

    Spots on Plaster

    Okay, that puts me at ease. I initially was thinking rebar or tie wire was rusting through already and I was about to lose my mind. Now, as Z asked, how do we get rid of them?
  2. D

    Spots on Plaster

    Do these spots look like rust stains? This is day 3 of water and noticed these today. They don't seem to want to brush away. Gunite shell sat for 6 months and had standing water in the bottom several times with no signs of rust and now this pops up after I plaster. Plaster start up guy came...
  3. 15930336417681998003434406729101.jpg


  4. 15930335947898882444038471437757.jpg


  5. D

    Damp spots on spa negative wall

    Still damp looking but not maybe not as bad. Going to buy some test plugs and air up the spa return and blower lines.
  6. D

    Damp spots on spa negative wall

    Fittings were prepped, at this point and think it is up for debate if it was prepped well. It was waterproofed around the spa pipe stub outs as they are shown in the third pic. The plaster guy put the fittings on the morning of the plaster and filled the remainder of the opening with plaster...
  7. D

    Damp spots on spa negative wall

    This morning brought severe thunderstorms so unable to check it. I did have a look at about 3am this morning when checking on the pool fill and took another pic. I also found some pic's of the gunite job around the pipes. These are the areas that had the loose gunite removed and repaired with...
  8. IMG_20200623_021129.jpg


  9. IMG_20191006_185004.jpg


  10. IMG_20190812_090955.jpg


  11. IMG_20190809_102334.jpg


  12. D

    Damp spots on spa negative wall

    Pool and hot tub was plastered on Sunday (after the rain passed). Finished filling it the same night. Went out to check on things this evening and noticed the negative wall of the raised spa had several damp spots. The negative wall still needs to be finished as I have yet to install the...
  13. 15928839040266026139043172385148.jpg


  14. 15928838667474776666244863494290.jpg


  15. D

    Pentair Easy Touch Wiring

    Good question on the pump. I originally had ordered Pentair model # 011018 but shortly after ordering the store called and said that was last years model and they were going to provide this years model. I was going on the original invoice info. When I get home I will check out the actual pump...