Recent content by cznkane

Much better! You running that filter / keeping it clean as well?

Sounds like light at the end of the tunnel!

You got this! Can't wait to see the sparkling "after" pictures. Keep at it!

Chlorine will be burned off by the sun every day, you'll want to test regularly and add liquid chlorine as needed to keep the proper level of FC. The Pool Math app will do the math for you (the right FC number is related to your CYA number). Typically at the start of the season I'll test every...

Thank you for the suggestions!

Bump, been looking at the betta skimmer

Thank you! I knew that was in the app somewhere, was looking at the CYA card and didn't see it. My plan (hope) was to use the tablets to raise my CYA the necessary amount but sounds like that might be a bit slow going. The 6 tablets in there will likely take a week to dissolve in the floater...

Closed the pool at the end of last season with about 50 CYA. Drained maybe 25% of the water as part of my winterization. Refilled and opened it back up about a month ago. Assumed I would have, say, 25% less CYA (about 35-40). Measured yesterday and I appear to have near 0. Would love...

Terrible...mine has died multiple times. Talking to Aiper now about a full refund.

Have had the Seagull Pro for one full season and it has died for the second time. First time was the batteries, second time the rotary knob. Anyone have a recommendation for a good cordless robot as well as a good skimmer robot? My pool has one tiny skimmer that needs to be emptied three times...

No doubt :LOL:

Good point. The Circupool manual says it's perfectly acceptable to power it 24/7 and rely on the flow switch to regulate generation on / off. I get ya though...if that flow switch fails and the generation turns on that could be ugly. I'll go edit my timer right now

Exactly how mine is set up

I went this route...didn't bother with calculations just bought the biggest one Circupool makes (17k pool, got the 60+ I believe). My setup is similar to yours OP in that my pump is turned on / off by it's own internal timer settings. Per the Circupool manual, I rely on the flow switch to turn...

I can answer this one! Do you have lights in your pool? A lot of times the 110v supply to the light transformer is wired through a GFCI outlet in order to add that protection to the system. Outlets SHOULD be fully functional and fine to plug a SWCG into