Recent content by chrisk500

I have attached a copy of the switch. I also cleaned up the top line connection by crimping it to a connector to attach. I have ran in both high and low speed and no luck. The motor through bolts was removed for me to check the impeller, but I have replaced them all now. I am getting 240 line...

No ideas?

So, I finally got around to looking at it again. I replaced the capacitor that is on top. Unfortunately did not solve the issue. I have verified each line going to the pump is 115 VAC by measuring the lines without them connected to the pump. The pump still moves freely by hand when not...

I just installed a new Pentair 2 HP Superflo dual speed pump. When I turn on the power, the pump hums but will not turn over and hums for about 10 seconds before the thermal overload trips. With the pump off, I can freely turn the motor from the back, but with power applied I can not turn it...

Thats what I was afraid of. Brand new heater just delivered. Seems like the transformer isn't putting out the correct voltage. Any ideas for that?

My other question i guess is will it power up with no flow? Does the pressure switch prevent the display from coming up? I measured voltage out of the transformer and there is definitely not 120vac or 24 vac coming out of it.

I am installing my pool heater and got power up to the unit. I have not installed the gas line or the plumbing yet. But right now I have no display on the panel. I at least expected something to come up on the display panel when I applied power to the unit? I don't want to go on with the rest of...

I am a little confused about what all I need to get screen logic installed wirelessly on my Easy touch system. I know I need the screen logic protocol adapater but this looks like it has to be hard wired to your wireless router inside the house. I also see part number 520639 which is the...

I am getting my pool installed and trying to decide on getting the easy touch 4 or 8 system. I will only have a pool (no spa). I will be using the intelliflow pump, intellichlor, eventually getting a gas heater and would like to control my deck jets, intellibrite pool lights and landscape...

Anyone know where I can buy some SGM spray deck? The site has a listing for a distribution center about 100 miles from me but it doesn't look like somewhere that sells to consumers.

We are looking at ideas for concrete coatings and color on our soon to be pool deck. I can not afford to get kool deck or spray deck done by a company but the more I look at the process for applying spray deck the more I wonder why it could cost so much. Looks pretty simple. Just spray on and...