Recent content by Cdemot02

Pool was fine no issues for the first year. The pool builder had to do a major repair and they left my pool empty for several months. The bottom center sat with dirty water, and the rest was drained. After the repair they did an acid wash. Ever since those two things the bottom of my pool has...

Exactly what they did

Looks like they got it working. Cody pools is coming out because I'm getting water from the Jets in the spa, but not enough pressure to make bubbles etc. You can here the pump kick up when you turn on the Jets. I'm guessing construction debris clogging them up. Thanks for all your help.

Basically said high-speed, sheers, etc shouldn't be aux

Pentair is going crazy on the system over the phone.

Hmm. I see wires on 3. 4,5,6 are the ones that show to be open. So basically even though I can see the aux I can't see where the red wires on the top are going to the board. Therefore even though the aux is open on the bottom the wires on the top of it could be using it on the board from another...

Jets are on aux 6. That is where we wired the lights

Yes it is screen logic.

They are wired to 6. We unhooked them just to check everything manually since we could program in the panel

We wired landscape lights to aux 6 on the control panel. The problem is the spa jets are labeled as aux 6. I'm not sure how that can be since nothing was wired to that aux. At this point I don't know how to program the landscape lights to work. Any help would be appreciated. Thanks