Recent content by Cayman

OEM it is. lol Thank you.

Thank you... I need to update my entire signature as we moved. I will take care of that. Is it best to go OEM, or is there a better replacement? I know when I replaced the salt cell flow switch, it was recommended to use a 3rd party. Thanks again!

I use the Pentair Screen Logic App. This is the only thing I see inline that may be it.

The pool temp on my app is showing about 110 degrees, which I know is grossly wrong. Is there a probe somewhere that should be cleaned or replaced? I am not sure where this temp is being read from. Thank you.

Pentair is not willing to warranty this. Their service seems to be horrible. I will end up replacing these myself. The question I have is does the pool need to be drained down or not? Thank you.

Yes, they were installed new with the pool build.

Roughly 3 years old.

I have what I believe to be 3 Pentair GloBrite lights in my pool. One in each end of the pool and one in the spa. The other night I was sitting outside and noticed one of the lights went out. Shortly thereafter, the light came back on for a few and then went out again. If I go into the app and...

Thank you for the links. So I would basically add 4-5 gallons of MA (17k gallon pool) and shut system down since I have a heater. Then brush pool many times a day and then add baking soda after achieved results, then turn system back on? We do have a secondary pump that runs the waterfalls, so...

It appears that we are getting some calcium buildup in our pool. We have 2 large sun shelves that I first noticed this on, but if I pour a little acid on the shelf, and scrub it with a brush, it goes away. In the picture attached, you can see what I am referring to, but this is in the deeper...

Does anyone know what brand channel drain this could be? We are looking for an adapter that will allow me to connect a PVC pipe to extend it away from the house. Thank you!

We have a neighbor that is having their pool plastered today. The builder told them they will acid wash it right after the plaster and begin filling it. Doesn't plaster usually need to set for about 24 hours before the acid wash and fill?