Recent content by CatalanBull

Awesome, great advice, I’ll go with the 3HP for sure. Thanks! Roger

Thanks Allen, so since it seems like the VSF pump is the one that will eventually replace my current pump I should probably keep this 2.18 motherboard. Thanks!

Thank you Jim, The IntelliFlo 3 VSF would be the replacement I will have to install, correct? Would you advise returning the 2.18 motherboard or keeping it for when I make the switch? Thanks, Roger

Hi, This past week I’ve been dealing with a couple of issues with my Pentair Easytouch system and the 011018 pump. The scheduling of the Easytouch seems to be malfunctioning: whenever I change the start or end time of a schedule while it’s running, the schedules randomly turn off afer a few...

I just tested the water, these are my numbers: FC: 4 CC: 0 PH: 7.8 TA: 80 CYA: 60 CH: 350 Salt: 3370 CSI: -0.13 When I took over taking care of the pool I replaced about 85% of the water. Hopefully keeping these numbers will help not add more scaling and calcium buildup to the sides. Thank...

I use the TF-100 with the C600. Thanks for the links/resources, I'll read them and start working on that. Thanks, Roger

Hi, Is there a way to get rid of these calcium marks around the pool and spa? Also, I have these white spots at the bottom, I don't know if it's calcium as well or something else. Any advice how to get rid of them? I started taking care of my pool in the last two weeks, I'm not sure if this is...

Great, thanks! I changed the scheduling as you said and I’ll wait a couple of days to see what happens. Thanks! Roger

Hi Allen, Jim, Something is off... Two nights ago I heard the pump at high revs so I went to check and found that the Easy Touch was set to off (it wouldn't have anything running, as in the first picture below), but the pump was running at high revs. The IC-40 was off because the ET indicated...