You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
You can order the R-0013 and/or cylinders from several places.
Here's one:
https://tftestkits.net/splash-page.html
I'm not a fan of the...
-
Thank you. Where do we order more supplies? I need a new chlorine cylinder too all the numbers have worn off.
-
Yes - test first and then add enough stabilizer to get to our desired CYA level using PoolMath.
Order more R-0013 reagent. You will be...
-
Yes, definitely get a fresh test before you add anymore.
-
Hi. I am going to increase the CYA today. It’s been 19 days since I did this before. Should I test the CYA before I start? I think I...
-
If you're only going to dose every 2 days, bump your CYA to 50 now. Dose for the high end of the FC target range or a few points higher...
-
Good morning. I seem to go to 2- 2.5ppm TC fairly quickly every two days when I only aim for 7 ppm TC. I added Cl to go from 2 to 10 ppm...
-
I think the 4 drops on pH test work better. Not so dark. Thank you!
-
Id agree with mknauss on the pH. Id call it 7.9.
If you leave the FC test alone itll start to turn pink again. Ignore that and stop the...
-
pH still does not have a violet hue to me so would be under 7.8.
Use one less drop of reagent for the pH and see if that helps.
-
Good morning. I added 16 oz of MA yesterday and 102 oz of chlorine. Designed to go down to 7.5 pH and up to 10 ppm FC. I did not test...
-
-
It takes less than 5 minutes to test and dose.
If you go out to look at the pool, take a quick water sample while you are out there...
-
Your log says your pool is using about 2ppm FC per day. A couple days ago you measured 2.5ppm and then added 5ppm of liquid. Two days...
-
Been testing every other day. I added enough chlorine to be up to 8.0 2-days ago. I’m down to 2.0 this morning. I have not been testing...
-
Loading…
-
Loading…
-
Loading…
-
Loading…